100% Virgin Thickness 0.5~60mm Skived PTFE Sheets
Features of PTFE :
1. Superior endurance in corrosion
2. Non-flammable, limited oxygen index is under 90
3. Low friction coefficient
4.Non-viscous, Self-lubricating
5. Superior endurance in high & low temperature, can be used at -1800~260°C
6.High electricity insulation
7.Atmospheric aging resistance, Good gas barrier property
8.Low permeability , Good gas barrier property
9.Good physiological compatibility and anti-thrombotic
1)PTFE Molded sheet: Using molding method to produce this kind of sheet. In big blocks, normally Lenght and Width has standard size, max size is 1000*2000mm.
Main techlonogy indicators :
| Iterms | tensile strength | ultimate elongation | Apparent density | voltage endurance | apparent resisitance |
| Unit | Mpa | % | g/m3 | kv/mm | Ω |
| standard |
≥15.0 |
150-400 | 2.2-2.3 | 10 | 3.7×1016 |
Specifications:
2)PTFE Skived sheet:Or we can call it film as well, thin thickness, width from 10~1200mm, packed in roll, continue lenght around 30-50M or more, detail lenght depends on the thickness.
Specifications:
| Iterms | Thickness | thickness devation | width |
| direct film | 0.03-0.10 | ±0.02mm | 10-20 |
| skived film | 0.10-0.49 | ±0.03mm | 10-300 |
| skived film | 0.50-1.0 | ±0.05mm | 10-1000 |
| skived tape | 1.10-5.0 | ±0.1mm | 10-1200 |
Filled material:
Filled PTFE ring has strong corrosion resistance and friction-resistance,By adding filler such as glass fiber,carbon fiber,copper powder,graphite,asbestos,MOS2,AL2O3,carbon powder,ceramic fiber,metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient.
|
Glass Fiber: |
Increases compressive strength, rigidity and wear. |
|
Carbon: |
Increases compressive strength, hardness, wear, and load properties. |
|
Graphite: |
Reduces coefficient of friction |
|
Molybdenum Disulfide: |
Increases hardness, stiffness, and wear |
|
Bronze: |
Increases hardness and wear resistance |
Application:
PTFEsheetsareusedinawidevarietyofindustriesincludingheavyelectricals,electronics
(forcircuitboards),pumpsandvalves.XinruiPlasticcapableofachievingglobalstandardsof
toleranceonPTFEproducts.
Send product request
Other supplier products
| Professional manufacturer for ptfe gaskets 8mm mechanical seal | PTFE Gaskets Types: Dimension:Outer Diameter,Inner Diameter, Thickness, Chamfer (If needed). Material:Virgin PTFE, filled PTFE, PEEK. Finish:With ... | |
| Professional machining ptfe parts teflon ring joint gasket | PTFE Gaskets Types: Dimension:Outer Diameter,Inner Diameter, Thickness, Chamfer (If needed). Material:Virgin PTFE, filled PTFE, PEEK. Finish:With ... | |
| Professional machining ptfe parts teflon ring joint gasket | PTFE Gaskets Types: Dimension:Outer Diameter,Inner Diameter, Thickness, Chamfer (If needed). Material:Virgin PTFE, filled PTFE, PEEK. Finish:With ... | |
| High performance PTFE screws wholesale hex screw | Features of PTFE : 1. Superior endurance in corrosion 2. Non-flammable, limited oxygen index is under 90 3. Low friction coefficient 4.Non-viscous,... | |
| best selling PTFE Skived Sheet/teflon best selling PTFE Skived Sheet/teflon sheetsheet | Features of PTFE : 1. Superior endurance in corrosion 2. Non-flammable, limited oxygen index is under 90 3. Low friction coefficient 4.Non-viscous,... |
Same products
| HD Han Dong air pressure disc brake, pneumatic disc brake, pneumatic brake DBH-103 | Seller: Shanghai Handong Machinery Technolo | This is an air-operated caliper disc brake. When compressed air is supplied, the air cylinder pus... | |
| Injection Molding Machine | Seller: Taizhou Qihong Mold Co., Ltd. | Taizhou Qihong Mold Co., Ltd. provides solutions for plastic manufacturing with a focus on inject... | |
| Semi-Automatic Blowing Machine | Seller: Taizhou Qihong Mold Co., Ltd. | Taizhou Qihong Mold Co., Ltd. offers Semi-Automatic Blowing Machine solutions for manufacturing p... | |
| JY-160S2 Standard Plastic Injection Machine | Seller: Dongguan Jieyang Machinery Co., Ltd | Straight screw ejected assembly. Two(three)-phase temperature, ejected speed, backing pressure a... | |
| WPC Terrace panel extrusion line | Seller: Qingdao Trusty Plastic Machinery Co.,Ltd | Wood-polymer composite (WPC), unlike wood, has higher resistance to aggressive environments and v... |











