Impact Tester for Tempered Glass

• 
• 
• 
• 
• 

Impact Tester For Tempered Glass

Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1) Weight:45kg±0.1kg 46kg±0.1kg 2) Height: 330mm ± 13mm 3) Max diameter: 250mm 4) Lead sand size: 2.5mm Pneumatic Tyres Impactor Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600 Reference standard: BS EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass MS 1498:2017 Safety glass in building - Specification Technical Parameters: Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Impact Frame Test Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Drop Ball Impact Test Machine Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object Hardness steel ball: a) 2260g ± 20g, diameter of approximately 82.5mm b) 227g ± 2g, diameter of approximately 38 mm c) 1040g ± 10g, diameter of approximately 63.5 mm d) 508g±3g, diameter of approximately 50 mm Frame Height: 1000mm, 5000mm, 12000mm, Customized Automatic release and lift. Power: 220V 50Hz 580W Supporting fixture: a) Support Size: 350mm*350mm and 660mm*660mm (Customized) b) Frame width 15mm c) Steel box height 150mm d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50 e) Interposed sheet of rubber: thickness 3mm, hardness shore A50 Applied Test Pieces Size: 300mm*300mm 610mm* 610mm Head-form Test Device Head Weight: 10kg Head Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mm Felt hat: 90g/89mm/3mm Frame size: 1400mm*666mm*320mm Safety Glass testing Equipment: Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass It is applicable to the field test for opt thermal parameters of energy-saving glass installed and or to be installed The data that the instrument can measure is: thermal parameters, optical parameters, light transmittance, light reflectance, shading coefficient, U value, LSG, Low-E position, E value, space thickness, overall thickness, glass thickness The types of glass that the instrument can measure are: Single pane, Laminated glass, Uncoated insulated glass, Coating on both sides and below, Coating on more than two sides, Coating on both sides and below, Coating on more than two sides, Vacuum glazing Pummel Test Device: Hammer head diameter: 30mm Impact Distance: Adjustable Shot Bag Impact Testing Frame: Shot Bag 45kg/46kg Automatic Release Electric Lifting Pneumatic Clamping PV Load Test Equipment Size: 6425mm*2000mm*3490mm Samples: 1643mm*991mm~2009mm*1027mm (Customized) Source: Sandbag Load: 2400Pa 5400Pa 8100Pa 10000Pa (Customized) Pneumatic Tyres Device Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Forced Entry Resistant Glass Test Device Axe: 810mm Long Axe Quality: 1.80kg Sample size: 610mm*610mm Insulating Glass Dew Point Meter Operating temperature: -80°C ~ 100°C Tube height: 300mm Tube diameter: 50mm Temperature resolution: 0.1 °C Hard/Soft Pendulum Shock Test for Lifts Hard pendulum shock device Height: 330± 15mm Max diameter: 240±10mm Weight: 10kg ± 0.1kg Material: according to ISO standard Filler: 3.5mm 0.25mm Soft pendulum shock device Height: 330mm ± 15mm Maximum diameter: 240mm±15mm Weight: 45kg ± 0.5kg Material: leather bag Filler: diameter 3.5mm ± 1mm lead sand Boiling Test Device Power: 220V 50Hz 3Kw (Customized) Outside Size: 400mm*255mm*480mm Inside Size: 400mm*255mm*480mm At most 6 samples with 300mm*300mm Tempered Glass Flatness Measuring Instrument Measurement of arcuate form and wave form of toughened glass Resolution: 0.01mm Measuring Span: 300mm-12000 mm ( Customized) Impactor for building Glass and Metal Guardrail Impact Steel ball Weight: 1040g ± 10g Dia: 63mm Shot bag impactor Data: Weight: 45kg ± 0.1kg Height: 330mm ± 13mm Max diameter: 250mm Material: leather bag filling lead shot Leather thickness: 0.15mm Lead sand size: 2.5mm Hard and Soft Body Impactors for Opaque Wall Components Soft body: Weight: 50kg Dia: 400mm Conical canvas bag filles with 3mm glass sphere Hard Body: Steel Ball 0.5 kg/50mm Steel Ball 1 kg/62.5mm

Other supplier products

	Tempered Glass Impact Strength Test Equipment	Tempered Glass Impact Strength Test Equipment Function: Determination of whether the safety glazing material has a certain minimum strength and co...
	Pendulum Impactor for EN 12600	Reference standard:BS EN 12600:2002Glass in building – Pendulum test – Impact test method and classification for flat glass Technical ...
	Intelligent Waste Sorting And Collection Box	Name: Intelligent waste sorting and collection box Material: cold rolled steel sheet/galvanized sheet Thickness: 1.5 mm and 2 mm Size: 3300 mm*800 ...
	Shot Bag Impactor	Shot Bag Impactor Reinforced leather bag filled with chilled lead shot. Technical Data: Weight: 45kg±0.1kg 46kg±0.1kg Height: 330...
	Machine equipment fence	Name: Machine equipment fence, equipment safety fence, automation equipment isolation net, industrial equipment robot fence Material: Q235 Dimensio...

Same products

	FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter	Seller: Phonefix	FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
	WF-EDU-02 Motor & Propeller Test Kit	Seller: Wing Flying Technologies Co., Ltd	WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
	WF-EDU-01 Motor and Propeller Test Kit	Seller: Wing Flying Technologies Co., Ltd	WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
	WF-EN-50 Engine Test Bench	Seller: Wing Flying Technologies Co., Ltd	Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
	WF-EN-15 Engine Test Bench	Seller: Wing Flying Technologies Co., Ltd	WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...