Boil Test Apparatus for Safety Glazing Materials in Buildings
Related Standard:
1) EN ISO 12543 - 4 Glass in building -Laminated glass and laminated safety glass - Part 4: Test methods for durability – Clause 5 High-temperature test
2) AS/NZS 2208 Safety glazing materials in buildings – Appendix F Boil Test
3) GB 15763.3 Safety glazing materials in building Part 3:Laminated glass – Clause 7.8 Heat resistance test
4) ANSI Z97.1 Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test - Clause 5.3.2 – ( 1 ) Boil Test
Data：
5) Power: 220V 50Hz 3Kw (Customized)
6) Outside Size: 430mm*290mm*575 mm
7) Inner Size: 400mm*255mm*480mm
8) Rack：340mm*235mm*350mm
9) At most 6 samples with 300mm*300mm
Scope:
10) Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling
Principle:
11) Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and others defects
Apparatus:
12) The apparatus include two water baths, each of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test.
Samples:
13) Three specimen of size 300mm*300mm manufacture in a manner identical with impact test specimens and of like thickness shall be tested.
14) These specimens may be cut from production samples of the size and thickness submitted for impact testing.
15) For heat strengthened or toughened laminated glass, test specimen may be cut from a similar original sheet of annealed laminated glass
Procedure:
16) Immerse the specimens vertically on edge in a bath of water maintained at a temperature of 66°C±3°C for 3 min
17) Quickly transfer the specimens to a bath of water maintain at boiling point. Immerse the specimens vertically on edge for 2 h
18) Remove the specimens and examine for the bubbles and others defects
Send product request
Other supplier products
 |
Metal S Hook Hanger S Shaped | Metal S Hook Hanger S Shaped Material: Carbon Steel Size: 680mm*50mm Thickness: 5mm Punching Hook for Suspension and Protection of Power Cables Un... |
 |
Impact Tester for Tempered Glass | Impact Tester For Tempered Glass Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1) Weight:45kg&plusm... |
 |
Tempered Glass Impact Strength Test Equipment | Tempered Glass Impact Strength Test Equipment Function: Determination of whether the safety glazing material has a certain minimum strength and co... |
 |
Automobile Engine Parts | Material: Stainless steel 304Size: 47mm*16mmThickness: 2mmWeight: 5gProcessing: Laser cutting Material: Stainless steel 304Size:88mm*19mmThickness... |
 |
Food Packaging Aluminum Cover Sheet Metal Drawing Processing | Food packaging aluminum coverSheet metal drawing processingAluminum sheet stamping and drawingMaterial: Aluminum plate 3003Thickness: 0.3mmSize: &P... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
