Impact Tester for Tempered Glass
Impact Tester For Tempered Glass
Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1) Weight:45kg±0.1kg 46kg±0.1kg 2) Height: 330mm ± 13mm 3) Max diameter: 250mm 4) Lead sand size: 2.5mm Pneumatic Tyres Impactor Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600 Reference standard: BS EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass MS 1498:2017 Safety glass in building - Specification Technical Parameters: Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Impact Frame Test Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Drop Ball Impact Test Machine Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object Hardness steel ball: a) 2260g ± 20g, diameter of approximately 82.5mm b) 227g ± 2g, diameter of approximately 38 mm c) 1040g ± 10g, diameter of approximately 63.5 mm d) 508g±3g, diameter of approximately 50 mm Frame Height: 1000mm, 5000mm, 12000mm, Customized Automatic release and lift. Power: 220V 50Hz 580W Supporting fixture: a) Support Size: 350mm*350mm and 660mm*660mm (Customized) b) Frame width 15mm c) Steel box height 150mm d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50 e) Interposed sheet of rubber: thickness 3mm, hardness shore A50 Applied Test Pieces Size: 300mm*300mm 610mm* 610mm Head-form Test Device Head Weight: 10kg Head Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mm Felt hat: 90g/89mm/3mm Frame size: 1400mm*666mm*320mm Safety Glass testing Equipment: Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass It is applicable to the field test for opt thermal parameters of energy-saving glass installed and or to be installed The data that the instrument can measure is: thermal parameters, optical parameters, light transmittance, light reflectance, shading coefficient, U value, LSG, Low-E position, E value, space thickness, overall thickness, glass thickness The types of glass that the instrument can measure are: Single pane, Laminated glass, Uncoated insulated glass, Coating on both sides and below, Coating on more than two sides, Coating on both sides and below, Coating on more than two sides, Vacuum glazing Pummel Test Device: Hammer head diameter: 30mm Impact Distance: Adjustable Shot Bag Impact Testing Frame: Shot Bag 45kg/46kg Automatic Release Electric Lifting Pneumatic Clamping PV Load Test Equipment Size: 6425mm*2000mm*3490mm Samples: 1643mm*991mm~2009mm*1027mm (Customized) Source: Sandbag Load: 2400Pa 5400Pa 8100Pa 10000Pa (Customized) Pneumatic Tyres Device Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Forced Entry Resistant Glass Test Device Axe: 810mm Long Axe Quality: 1.80kg Sample size: 610mm*610mm Insulating Glass Dew Point Meter Operating temperature: -80°C ~ 100°C Tube height: 300mm Tube diameter: 50mm Temperature resolution: 0.1 °C Hard/Soft Pendulum Shock Test for Lifts Hard pendulum shock device Height: 330± 15mm Max diameter: 240±10mm Weight: 10kg ± 0.1kg Material: according to ISO standard Filler: 3.5mm 0.25mm Soft pendulum shock device Height: 330mm ± 15mm Maximum diameter: 240mm±15mm Weight: 45kg ± 0.5kg Material: leather bag Filler: diameter 3.5mm ± 1mm lead sand Boiling Test Device Power: 220V 50Hz 3Kw (Customized) Outside Size: 400mm*255mm*480mm Inside Size: 400mm*255mm*480mm At most 6 samples with 300mm*300mm Tempered Glass Flatness Measuring Instrument Measurement of arcuate form and wave form of toughened glass Resolution: 0.01mm Measuring Span: 300mm-12000 mm ( Customized) Impactor for building Glass and Metal Guardrail Impact Steel ball Weight: 1040g ± 10g Dia: 63mm Shot bag impactor Data: Weight: 45kg ± 0.1kg Height: 330mm ± 13mm Max diameter: 250mm Material: leather bag filling lead shot Leather thickness: 0.15mm Lead sand size: 2.5mm Hard and Soft Body Impactors for Opaque Wall Components Soft body: Weight: 50kg Dia: 400mm Conical canvas bag filles with 3mm glass sphere Hard Body: Steel Ball 0.5 kg/50mm Steel Ball 1 kg/62.5mm
在线联系供应商
Other supplier products
 |
人头模型试验装置 ISO 3537 | 汽车玻璃人头模型 汽车玻璃检测设备 安全玻璃材料力学试验设备 汽车玻璃人头模型 汽车玻璃检测设备 安全玻璃材料力学试验设备 参照标准： GB/T 5137.1汽车安全玻璃试验方法第1部分：力学性能试验 GSO ISO 3537-1998机动车辆-安全玻璃材料力学试验 试验目的：评价在钝物冲... |
 |
BS EN 12600 Dual Tyre Glass Impact Test Equipment, Construction Glass Impact Test | BS EN 12600 Dual Tyre Glass Impact Test Equipment, Construction Glass Impact Test Reference Standard: BS EN 12600:2002 Glass in building – P... |
 |
LED支架框架 5052铝板冲压切割 五金冲压配件 | LED支架框架 5052铝板冲压切割 五金冲压配件 材质：铝5052尺寸：292mm * 232mm厚度：2mm重量：125克 |
 |
非标金属加工-金属过滤网 | 名称：电镀海绵过滤片 金属过滤网 材质：海绵电镀 厚度：10mm 表面：电镀 尺寸：φ 54mm 重量：4g 工序：激光切割 用途：压铸过滤、过滤铝水 |
 |
Falling Ball Impact Testing Apparatus for safety Glass | Falling Ball Impact Testing apparatus Function: Determination of whether the safety glazing material has a certain minimum strength and cohesion un... |
Same products
 |
Optical Brightener OB-1 (OBA 393) | 卖方: Jinan Ogilvy Chemical Co., Ltd | Chemical Name: 2-[(Ethylsulfanyl)methyl]phenyl methylcarbamateC.I.: 393CAS: 1533-45-5Molucular Fo... |
 |
PH-A63防水笔式PH/EC/温度三合一测试仪 | 卖方: 科立龙电子股份有限公司 | 特点 基于微处理器的快速准确显示-新的坚固耐用的人体工程学设计-外观时尚,携带方便 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 电池电量缺电指示 自动关机；使用... |
|
|
PH-A6防水笔式高精度酸碱度/ 温度计 | 卖方: 科立龙电子股份有限公司 | 特点 基于微处理器的快速准确显示-新的坚固耐用的人体工程学设计-外观时尚,携带方便 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 电池电量缺电指示 自动关机；使用... |
|
|
PH-A8防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 两点按键校准,自动识别pH标准缓冲液；自动电源关闭，有效节省电池能耗。 两节七号大容量供电。适用于土壤、面团等。 ... |
 |
TH021W 物联网温湿度控制器 | 卖方: 科立龙电子股份有限公司 | 产品说明： 本电子温控器可用于仓储、宠物、养殖、栽培等各种温湿度控制场合，比如给温室、冬季花园加温或降温，以及水族馆水温监控、育种土壤的温控。操作简便，可与任何电热垫或其它加热或冷却设备连... |
