Automotive Connectors Salt Spray Tester
The salt spray tester for automotive connectors is suitable for testing the corrosion resistance of various material surface treatments, including metal electroplating, coatings, organic and inorganic films, anodizing, rust - preventive oils, and chemical conversion treatments, so as to achieve long - term corrosion resistance of finished products.
Applicable Standards:
It can be used to conduct neutral salt spray tests in accordance with GB/T2423.17 *Basic Environmental Test Procedures for Electrical and Electronic Products: Salt Spray Test Method*. It can also be used for acetic acid salt spray tests and complies with CNS 3627, 3885, 4159, 7669, 8886, JISD - 0201, H - 8610, K - 5400, Z - 2371, ISO 3768, 3769, 3770, ASTM B - 117, B - 268, GJB 150.
Technical Parameters:
1. The test chamber is made of P.V.C (polyvinyl chloride) plates, which can withstand temperatures up to 80°C. 2. The sealing cover of the test chamber is made of transparent acrylic impact - resistant plates. 3. The operating temperature can be set for horizontal constant - temperature control.
Brine Spray Test:
(1) Test chamber: 35°C ± 1°C (2) Saturated air tank: 47°C ± 1°C Corrosion Resistance Test: (1) Test chamber: 50°C ± 1°C (2) Saturated air tank: 63°C ± 1°C
Accessories:
A. Reagents: Two bottles of 500g - packed NACL, one bottle of 500g - packed glacial acetic acid, one bottle of 500g - packed NAOH, and one box of PH litmus paper. B. Measuring tools: One standard graduated cylinder, one measuring instrument, etc.
Send product request
Other supplier products
 |
Automotive connector insertion and withdrawal force testing machine | StandardsDesigned to meet rigorous automotive industry standards, including ISO 5023, IEC 60512, and USB-IF specifications, our testing machine ens... |
 |
Mechanical load testing machine for photovoltaic modules | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photovo... |
 |
Dry and Wet Retroreflectometer | Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry and wet sand abrasive wear testing machine is mainly us... |
 |
Textile water evaporation rate tester | Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana... |
 |
Cleveland Open Cup Flash Point Test device | The Automatic Cleveland Open Cup Flash Point Analyzer is the latest addition to the Koehler Flash Tester family of products.This unit is robustly d... |
Same products
 |
Reliable Components for Water and Industrial Systems | Seller: 866507 | The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem... |
 |
Double Convex Lenses | Seller: Shandong Yanggu Constant Crystal Optics, Inc | Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga... |
 |
Wedge Prism | Seller: Shandong Yanggu Constant Crystal Optics, Inc | Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow... |
 |
Ball Lenses | Seller: Shandong Yanggu Constant Crystal Optics, Inc | Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use... |
 |
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery | Seller: Xin Tang Shallow Power Supply Co.,LTD | KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems... |
