Electric High Pressure Ball Valve
SEHO electric high pressure ball valve is composed of 3601R angular travel electric actuators and
3-piece high pressure ball valve body assembly. The trim adopts trunnion mounting ball. Due to
specialized optional metal to metal sealing or to nonmetal sealing material combination ,it can
guarantees excellent conveying and shut-off performance against process fluid which being at
-196℃～530℃ working temperature and up to 250Kg/cm2 working pressure.
SEHO Electric High pressure Ball Valve is characterized by compact structure, effective handle
and long lifetime. It can be widely used in oil, chemical, power station, paper and pulp,
metallurgy , sewage treatment etc. processing industries to control high pressure or high pressure
drop fluid, especially suitable for the fluid entrained with fibre or particle.
■ Standard Specifications
Body
Type: Three pieces cast/forged ball valve (As shown in figure 1)
Nominal Size : DN10,15,20,25,32,40,50,65,80,100 ,150
Nominal Pressure：GB PN6.3,10, 16, 25 MPa;
ANSI CLASS600, 900,1500
End Connection: Flange GB PN1.6, 2.5, 4.0,6.3 Mpa according to HG20596-97M,FM;
ANSI CLASS150,300 according to ANSI B16.5 RF and
HG/T20615-97;
Weld SW according to ASME B16.11-2005;
BW according to ASME B16.25-2007;
Thread according to ASME B1.20.1-2001;
Face to Face Dimension: Please refer to table 7
Body Material: Please refer to table1 1
Bonnet Type： Together with body
Packing Material: V-type compound packing,graphite compound packing、
graphite packing, Operating Temp. (As shown in table 2
Seal Gasket： Spiral wound gasket, Graphite with metal gasket, Zigzag gasket, Flat
gasket.
Specific materials and operated temp. range as shown in table 3.
Packing Gland ： Bolts impacted
Paint: Carbon steel shell surface required to paint, stainless steel or copper
surface without paint .
Trim
Plug type: Ball with through way flow passage
Flow characteristics: Quick open
Trim material: STD material assembly and operated Temp. are shown in table 4
Rotary angle: 90°
Actuator
Type: 3601R series angle travel electric actuators(As shown in figure 2)
Power Supply: Single phase AC220V±10% 50HZ，Three phase AC380V±10% 50HZ
Power Consumption: Model A 50VA;model B 150VA; model C 220VA(all under rated load)
Control Signal:DC4~20mA，DC1~5V（Long distance avoid DC1~5V）
Output Signal:DC4~20mA，DC1~5V（Loaded resistance below 500Ω）
Action:Direct action or Reverse action can be changed by two specific switches.
Max Rotary Angle: 90°
Protection Category: IP65
Explosion-proof marker: Exd II BT4
Overload Protection: Optioned by model A and model B ,must equipped with model C
Standard Configuration with Valve: please refer to table 5
Performance
Travel Time: please refer to table 5
Seat Leakage: Metal seal is according to ANSI B16.104 ClassⅣ，ClassⅤ，soft seal is according to
ANSI B16.104 Class VI
Rated Cv:As shown in table 5.1,5.2
Allowable Pressure Differential: As shown in table 6.1~6.4
Figure Size: As shown in figure 3, table 7
Weight of Product: As shown in table 7
Special requests
Produced according to the requirements of customers, details as follows:
○Special inspection
Flow characteristic test，material test，low temperature test，steam test，non-damages test
○copper-free treatment
○completely oil-free,water-free treatment
○appointed coating
○special air piping and fitting
○dust and sand proof
○strong corrosion proof
○vacuum service
○stainless steel bolt and nut for exposed parts
○cold area proof
○tropical area proof
○Machining back of flange back
○With Sewage bolt
○Double packing
○Steam jacket
Other supplier products
All supplier products
Same products
