Safety Helmet Flammability Tester
Product Introduction:
Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, easy to operate, widely used in safety hat manufacturers, major quality inspection units and construction engineering testing stations.
According to the criteria:
GB/T 2811-2007 "Hard Hat"
GB/T 2812-2006 "Safety Helmet Test Method"
GB/T 38305-2019 "Head Protection Rescue Helmet"
CEISO9001 1S017025
Product Advantages:
Measures Critical Safety Property: Quantifies the flame retardant performance of safety helmets, essential for protecting wearers in environments with fire hazards.
Standard Compliant: Designed to meet relevant national standards (GB/T 2811. GB/T 2812. GB/T 38305) for safety helmet flame resistance testing.
High Automation: Features a high degree of automation, ensuring consistent test execution and ease of use.
Provides Objective Timing: Includes precise timers for measuring afterflame and afterglow times.
Uses Standardized Flame Source: Utilizes a Bunsen burner with specified dimensions and allows the use of standard test gases.
Suitable for Safety Hats/Helmets: Specifically designed for testing head protective equipment.
Widely Used: Adopted by manufacturers and testing/inspection bodies in the safety helmet industry.
Product Features:
Standard Bunsen burner with a specified inner diameter (10mm) to provide the test flame.
Mechanism for positioning the Bunsen burner flame relative to the safety helmet or test specimen according to the standard's requirements.
Igniter timing system to control the duration for which the flame is applied to the specimen, with a wide adjustable range (0-999.9 seconds) and a typical setting (10 seconds).
Follow-on timer system to accurately measure the afterflame time (how long the specimen burns with a flame after the Bunsen burner is removed) and afterglow time (how long the specimen continues to glow without a flame), with a specified accuracy ($pm$0.01 seconds).
Flame length measuring device with a scale (50mm length) to ensure the test flame is set to the correct size.
Capability to use specified gases (methane, propane, butane, LPG) as the fuel for the Bunsen burner, as required by the test standard.
Fixture or system to securely mount the safety helmet or a test specimen cut from the helmet for testing.
High degree of automation for the test procedure, from flame application to timing.
Safety features (implied) for conducting flame tests.
Main parameters:
Inner diameter of Bunsen burner: 10mm
Igniter timing: 0 —— 999.9 seconds arbitrary setting, the international adoption of 10 seconds
Follow-on timer: 0 —— 999.9 seconds, accuracy: ±0.01 seconds
Flame length measuring device: scale length 50mm
Gas used: methane, propane, butane, LPG 3W '
Power supply: AC220V, 50Hz, 50W
Send product request
Other supplier products
 |
DSC Differential Scanning Calorimeter tester | The Differential Scanning Calorimeter (DSC) measures the heat flow to or from a sample under controlled heating conditions. A small amount of sampl... |
 |
Battery diaphragm permeability tester | Technical parameters: Test range: 10-15000s/100ml（standard configuration） Other ranges are optional. Resolution: 0.1s/100ml Pressure accuracy: 0... |
 |
Rubber Resilience Tester | Standard Complies withISO 4662:1986(international),JIS K6255(Japan), andGB/T 1681(China) standards for standardized resilience testing of vulcaniz... |
 |
High Velocity Impact Tester | Main Purpose To test the impact - resistance performance of glasses, goggles and face shields at a certain speed. Applicable Standards SNELL S... |
 |
Zipper Fatigue Tester | Product Introduction: The functional life of a zipper is often determined by its ability to withstand numerous opening and closing cycles without ... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
|
|
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
