Pneumatic Ceramic Ball Valves
SPCO Pneumatic ceramic ball valve is composed of GTX-B series pneumatic rack and pinion actuators and ceramic ball valve body assembly. All bodies and wet parts are completely lined a new generation ceramic material,partially stabilized zirconia, rockwell hardness of which is more than HRA87. Compared to stainless high alloy steel, the SPCO ceramic ball valve is superior in all aspects,including resistance to corrosion, abrasion,cavitation and high temperature.
It can be used in the most severe service industrial applications .It is ideal substitute of ball valve made of titanium or Monel.
This series ceramic ball valve has advantages of low cost, high efficiency operation and long life (2 ~ 4 times of titanium valve).
Its main application fields are as follows:
1.Power plants (FGD units, fly ash, lime &lime slurry, gypsum, filtrate water with solids, etc.)
2. Waste incinerators (FGD, lime slurry, HCI scrubber water, etc.)
3. Steel production(coal powder injection, Smalley process, lime, silicate MgO, etc.)
4. Pulp&paper (kaolin, bentonite,talcum, quartz, MgO, CaCO3,other fillers, bleachers,NaOH, filtrate water with solids,etc)
5. Chemical process plants (various acids, metal slurry, bases, polymers, TiO2 slurry, TiCI4, FeCI2, caustic , mixed liquor,etc)
6. Pneumatic conveying (sand, lime, glass , cement, ore, gypsum, powder, etc.)
7. Fertilizer (ammonium nitrate, phosphoric acid and phosphate)
■ Standard Specifications
Body
Type: Three pieces cast or forging ball valve (As shown in figure 1)
Nominal diameter: DN15,20,25,32,40,50,65,80,100,125,150,200
Nominal Pressure: GB PN1.0,1.6, 2.5,4.0 MPa
ANSI CLASS150,300
End Connection: Flange
GB PN1.6,2.5,4.0Mpa according to HG20596-97M,FM；
ANSI CLASS150,300 according to ANSI B16.5 RF and HG/T20615-97
Face to Face Dimension: PN1.6MPa,CLASS150 RF according to GB/T12221-1989,EN558.1:1995,ISO5752-1982 basic series 12;
PN2.5,4.0MPa,CLASS300RF according to GB/T12221-1989,EN558.1:1995,ISO5752-1982 basic series 4;
Body materials: Please refer to table1 1
Bonnet Type： Together with body
Packing Material: V-type compound packing,graphite compound packing、
graphite packing, Operating Temp. (As shown in table 2
Seal Gasket： Spiral wound gasket, Graphite with metal gasket, Zigzag gasket, Flat gasket.
Specific materials and operated temp. range as shown in table 3.
Packing Gland ： Bolts impacted
Paint: Carbon steel shell surface required to paint, stainless steel or copper surface without paint .
Trim
Ball Type: through way floating ball
Flow Characteristics: Quickly opening
The Materials of Ball, Seat and Packing retainer: Partially stabilized zirconia
Stem Materials: 17-4PH, 0Cr17Ni12Mo2Ti and Hastelloy alloy
Rotary angle： 90 °
Other supplier products
|
|
Pneumatic teflon-lined ball valve |
SPFO Pneumatic teflon-lined ball valve is composed of GTX - B series pneumatic rack and pinion actuators and teflon-lined ball valve body assembly.... |
|
|
Pneumatic Ceramic Ball Valves |
SPCO Pneumatic ceramic ball valve is composed of GTX-B series pneumatic rack and pinion actuators and ceramic ball valve body assembly. All bodies ... |
|
|
Top Guiding Parabolic Plug Type |
STP is the basic type among SH6000 high performance control valves. Metal-seated quick-changeable
trim combination. Insensitive to impurities with... |
|
|
Parabolic Plug Single Seat Cage Type Control Valve |
Parabolic Plug Single Seat Cage Type Control Valve is German Technical design, single seat regulator including cage with the import and ex... |
|
|
Electric High Pressure Ball Valve |
SEHO electric high pressure ball valve is composed of 3601R angular travel electric actuators and
3-piece high pressure ball valve body assembly. ... |
All supplier products
Same products
