Top Guiding Parabolic Plug Type
STP is the basic type among SH6000 high performance control valves. Metal-seated quick-changeable
trim combination. Insensitive to impurities with low cavitation design. Fast and easy to maintenance due to
its rotational symmetry. This series is characterized by optional metal to metal sealing and PTFE-soft
sealing supported by an additional Elastomer O-ring. STP series can be used in a wide range of applications,
especially suitable for the fluid with entrained particle and larger temperature variety because of won't
being locked.
■ Standard Specification
Valve Body
Type: Cast globe Valve
Nominal Size: DN15, 20, 25, 32, 40, 50, 65, 80, 100,
150, 200, 250, 300, 350, 400
Nominal Pressure: ANSI 150, 300
DIN PN16, 25, 40
JIS 10K, 20K, 30K
GB PN1.6, 2.5, 4.0 MPa
End Connection: Flange ANSI B16.5 RF, RTJ
DIN2543/2544/2545 RF
JISB2201 RF
JB/T81 RF
JB/T82.2 FM
Weld: ANSI B16.5 SW(DN≤50); BW(DN>50)
Face to Face Dimension:
ANSI150RF, JIS10K (IEC60534-3-1 37 Series)
ANSI300RF, JIS20K, JIS30K (IEC60534-3-1 38 Series)
ANSI150/300 RTJ (ASME B16.10 CLASS 150/300RTJ)
DIN PN16, 25, 40 (DIN3202-F1)
GB PN1.6, 2.5, 4.0 MPa (ISO5752 1 Series)
Please refer to table 6.1~6.4
Body Material:Please refer to table1 Please refer to figure 3 for Operated Temp. &Pressure Range
Bonnet Type:STD type……-46℃~200℃; 200℃~300℃
Radiation fin type……300℃~530℃
(Please pay attention to the different Temp. &Pressure Range of material)
Packing Material:PTFE V-ring compound packing、graphite compound packing、
graphite packing,
Operating Temp. &Pressure range is shown in table 2,figure2
Seal Gasket:Spiral wound gasket(PTFE+316、Flexible Graphite+316),
Graphite with metal gasket(Graphite+316、Graphite+304)
Valve Trim
Plug Type:Parabolic column plug
Flow Characteristic:EQ%、Linearity、Quickly opening(Please refer to figure4)
Trim Material:Please refer to table 3 for STD material assembly,operated Temp. &Pressure Range
Actuator
Type:Multi-spring diaphragm
Air Supply:Max. 6bar
Ambient Temp.:-20℃~+80℃
Spring range:As shown in Table 5.1~5.5
Air Connection:G1/8(SA1);G1/4(SA2);G3/4(SA3)
STD Specification:As shown in Table 5.1~5.5
Accessory
Positioner,Filter-regulator valve,Solenoid valve,Limit switch,
Valve position Transmitter,Booster relay,Lock-valve,Handwheel,etc.
Action
Air to open,Air to close
Performance
Range ability:50:1
Seat leakage:Metal seal is according to ANSI B16.104 ClassⅣ,ClassⅤ
Soft seal is according to ANSI B16.104 ClassⅥ
Hysteresis:3%(Without Positioner) 1%(With Positioner)
Linearity:±5%(Without Positioner) ±1%(With Positioner)
Rated CV:As shown in table 4
Allowable pressure differential:As shown in table 5.1~5.5
Figure Size:As shown in figure5.1,5.2,table 6.1~6.4
Weight of product:As shown in table 6.1~6.4
■ Specifications:
○Special inspection
Flow characteristic test,material test,low temperature test,steam test,non-damages test
○copper-free treatment
○non-standard painting
○dust and sand proof
○vacuum service
○tropical area proof
○completely oil-free,water-free treatment
○special air piping and fitting
○strong corrosion proof
○stainless steel bolt and nut for exposed parts
○cold area proof
Notable Characteristics
○Both faces of valve seat can be used to improve service life
○Quickly disassembly and installation without any special tools
○Good price performance
○Optimize flow of cage
○Various of materials are available
○Maintenance-free for packing
○Packing stuffing box is wear resistance and corrosion resistance
Other supplier products
All supplier products
Same products