AC Digital Meter
AC Digital Meter
- Brief Introduction
DTSF/U353 is a three phases four wires digital energy meter with current transformer, LCD backlight, IR & RS485 communication ( protocol EN62056:IEC1107 & DLT645:2007 ) and tariff, which can measure and record the active energy consumption of load in 50Hz single phase AC power grid
- Technical Parameter of 3P Din Rail Meter
|
3*220/380V |
|
|
3*1.5(6)A |
|
|
Impulse constant |
12000imp/kWh |
|
LCD display |
LCD5+3 |
|
Operation temp. |
-20~+70℃ |
|
Storage temp. |
-40~+80℃ |
|
Relative humidity |
≤90% |
|
50Hz |
|
|
Accuracy class |
|
|
Starting current |
|
|
Creeping |
Anti-creep logistic design |
|
Power consumption |
≤2W,<10VA |
|
Standard compliant |
Performance test: GB/T 17215.321-2008 GB/T 17215.211-2006 Protection degree: GB/T20138-2006 |
- Din Rail Energy Digital MeterMetering Function
Active & reactive energy, forward & reverse measurement
3 elements settable (positive,positive+negative,positive-negative)
CT ratio range: 5:5 ~7500:5
(5:5,40:5,50:5,60:5,75:5,100:5,125:5,150:5,200:5,250:5,300:5,400:5,500:5,600:5,800:5,1000:
5,1250:5,1500:5,2000:5,2500:5,3000:5,4000:5,5000:5,6000:5,7500:5)
5:5----40:5LCD=5+3;
50:5----300:5LCD=6+2;
400:5----3000:5LCD=7+1;
4000:5----7500:5LCD=8+0;
Support max demand
Support resetting energy
Support setting holiday tariff & weekend tariff
Support IR communication, EN62056 (IEC1107) protocol
RS485 Communication, DLT 645:2007 protocol
- Measuring Devices meter wholesaleDisplay Function
Displaying total energy, tariff energy, 3 phases voltage, 3 phases current, power, apparent power, power factor, frequency, demand, ct ratio, impulse output, communication address etc.
Plz refer to LCD display part
Selecting display content, setting CT ratio, LCD scrolling period and resetting energy & backlight type via 2 keypads.
Setting content of automatic scrolling mode via IR
Support 3 types of displaying can be set via keypads:
Selecting lighting when pressing the key / normal bright / normal dimmed
- Din Rail MeterImpulse Output
Support 4 types of impulse output method via communication:
Selecting 12000 / 1200 / 120 / 12
Send product request
Other supplier products
 |
Kwh Meter | Kwh Meter DTSY-T01 is a single phase din-rail metertwo wire split type prepayment keypad meterapproved by STS. It can access to any STS standard sy... |
 |
1 Phase Smart Sensor | 1 Phase Smart Sensor single phase smart sensorwith WIFI & RS485 communication, switch control, energy measurement... IOT Multifunctional Smar... |
 |
DCU | DCU J119005 is a concentrator which can read and reserve device data via Ethernet according to master station’s command, and actively upload ... |
 |
CT PT VT Meter | CT PT VT Meter This is a three phases DLMS multifunctional energy meterwhich was warmly welcomed in South-American due to standard installation. It... |
 |
AMI Meter | AMI Meter This is one of latest AMI system solution which combines almost all kinds of wireless communication, including Zigbee, PLC, GPRS and Wifi... |
Same products
 |
Wiring Harness Connector | Seller: Aupins Technology Co., Ltd | Connector plugs are used as electromechanical components to connect electrical circuits. AP team ... |
 |
SAE J1772 Charging Connector | Seller: Aupins Technology Co., Ltd | AP SAE J1772AC EV charging plug conforms to SAE J1772provisions and requirements. It is compatibl... |
 |
IEC 62196-2 Charging Connector | Seller: Aupins Technology Co., Ltd | AP IEC AC charging plugs conform to IEC 62196-2 2-llb provisions and requirements. It is compatib... |
 |
Hyperboloid Contacts | Seller: Aupins Technology Co., Ltd | The hyperboloid contactsspring terminal is the patented product specially developed and researche... |
 |
GB/T Charging Connector | Seller: Aupins Technology Co., Ltd | GB/T Charging Connector is widely used in the AC charging system of electric vehicles and conform... |
