Beamsplitter Plate
Beamsplitter Plate
beamsplitter penta prism
beamsplitter cube
A plate type (mirror-type) beamsplitter is an optical window with semi-transparent mirrored coating to break a beam into two or more separate beams. A beamsplitter will reflect a portion of the incident energy ( see reflection %), absorb a relatively small portion, and transmit the remaining energy (see transmission %). Beamsplitter plates have very neutral color characteristics and are often referred to as beam-splitters plate.
Capacity:Material: N-BK7 or N-SF1Dimension Tolerance: ±0.2 mmBeam Deviation: <5 minuteSurface Figure: λ/4Surface Quality: 60-40Splitting Ratio: 50/50±5%, T=(Ts+Tp)/2, R=(Rs+Rp)/2Coating: S1: Partial Reflectance CoatingS2: Anti Reflection coating
Specification:
|
Material |
Float white glass |
|
Dimension Tolerance |
±0.2mm |
|
Thickness Tolerance |
±0.2mm |
|
Clear Aperture |
>85% |
|
Surface Quality |
60-40 scratch and dig |
|
Parallelism |
< 1 arc minute |
|
Flatness |
λ/4 per 25mm |
|
T/R |
50/50+/-5%, for random polarizationT=(Ts+Tp)/2, R=(Rs+Rp)/2 |
|
Protective Bevel |
<0.25mm x 45° |
|
Coating |
Incidence angle: 45°S1: Single wavelength partial reflectance S2: V type AR-coatings |
Narrowband Beamsplitter Plate Standard Products:
|
Wavelength(nm) |
532,632.8,635,670,780,850,980,1064,1300,1550 |
||
|
Part No. |
TNB501 |
TNB502 |
TNB503 |
|
Size(mm) |
25x25x2 |
50x50x2 |
|
Note: Other material, size and wavelength are available upon request.
Broadband Beamsplitter Plate
Specification:
|
Material |
Float white glass |
|
Dimension Tolerance |
±0.2mm |
|
Thickness Tolerance |
±0.2mm |
|
Clear Aperture |
>85% |
|
Surface Quality |
60-40 scratch and dig |
|
Parallelism |
< 1 arc minute |
|
Flatness |
λ/4 per 25mm |
|
T/R |
50/50+/-5%, for random polarizationT=(Ts+Tp)/2, R=(Rs+Rp)/2 |
|
Protective Bevel |
<0.25mm x 45° |
|
Coating |
Incidence angle: 45° S1: Broadband Partial Reflectance S2: BBAR-coatings |
Broadband Beamsplitter Plate Standard Products:
|
Wavelength(nm) |
450-650, 650-900, 900-1200, 1200-1550 |
||
|
Part No. |
TBB101 |
TBB102 |
TBB103 |
|
Size(mm) |
25x25x2 |
50x50x2 |
|
Note: Other size and wavelength are available upon request.
Send product request
Other supplier products
 |
Plano Convex lens | Plano Convex lens These lenses have positive focus length. Most suitable where one conjugate is more than five times, the other. e.g. in sensor ap... |
 |
Reticule series | Reticule series Optical Lens Infrared Filter Geodetic Surveying series Grating, optical dial and various reticules are widely used in the geode... |
 |
Assembly series | Assembly series Optical Heteromorphic Window Rhombic Prism We can design and produce the assembly lens according to customer’s requirment.... |
 |
Roof Prism | Roof Prism Roof Prism with high dimension control and apply to any Anti-reflecting coating.It may be used to revert and invert the image as well a... |
 |
Corner Cube Prism | Corner Cube Prism Corner Cube Prismis always used to reflect the beam entering the prism face, regardless of its orientation to the beam. Corner c... |
Same products
 |
Rod Lenses | Seller: Shandong Yanggu Constant Crystal Optics, Inc | Rod lensesare precision optical components designed for a variety of applications, including fibe... |
 |
light beam splitter | Seller: Changchun Hongsheng Optoelectronics Co.,Ltd. | light beam splitter Polarizing cube beamsplitters split randomly polarized beams into two ... |
 |
What Is a Cylindrical Lens Used For? | Seller: Changchun Hongsheng Optoelectronics Co.,Ltd. | What Is a Cylindrical Lens Used For? are prescribed to correct astigmatism. Cross cylinder, ... |
 |
optical prism supplier,optical prism | Seller: Changchun Hongsheng Optoelectronics Co.,Ltd. | optical prism supplier,optical prism Optical Prism An is a solid, transparent optical eleme... |
 |
light beam splitter | Seller: Changchun Hongsheng Optoelectronics Co.,Ltd. | light beam splitter Light Beam Splitter Polarizing cube beamsplitters split randomly polari... |
