Heel Fatigue Tester ISO 19956
Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.
Application:
The heel fatigue tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.
Procedure：
Clamp the heel on the machine, adjust the height position and angle of the heel according to the equipment, adjust the hammer in the horizontal position, pre-set the number of impacts, start the equipment. The hammer would impact the heel with the specified energy of 0.68J, 60 cycles per minute. Continuous testing until the heel breaks or reaches the specified number of impacts, the equipment automatically stops, and the number of impacts is recorded. This test method is used to assess the resistance of the heel to the repeated impact with certain mass.
Feature：
A heel is subject to blows of specified energy, delivered by a pendulum under a specified frequency, testing continues until failure of the heel takes place or satisfactory fatigue resistance is achieved.
Parameters：
Impact Energy：0.68J / blow
Impact Frequency：60 blows /min
Adjustable Range of Base Clamp：90mm (H), 80mm (W), angle 0~180°
Counter LCD：0~999.999
Main unlt：46×46×75cm
Control box：18×21×20cm
Weight：70kg
Power Supply：1∮ AC 220V,3A
Standards:
BS-5131 4.9.
ISO 19956
SATRA TM21.
QB/T2864
Send product request
Other supplier products
 |
Catheter Vacuum Leak Tester | Standards GB 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods GB 8368 Disposable Infusion SetsYY ... |
 |
Thermal - Cold Cycle Testing Machine / Hot and Cold Thermal Cycling Testers | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification: ... |
 |
Spectrophotometer ISO 7724 | Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri... |
 |
Whole shoe breathability and heat preservation testing machine | Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SATRA TM386: Water vapor permeability assessment for athletic... |
 |
SUGA U48 Carbon Arc Aging Tester | Main purpose: The Si80 domestic carbon arc aging chamber is a comprehensive climate testing device mainly used to simulate the changes in materi... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
