Footwear Cold Insulation Tester EN ISO 20344 / DIN 53351

• 

Product Introduction

Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under various low temperature environment to understand the ability of various materials or finished shoes to adapt to low temperature climate or cold terrain area, this instrument is made of rust SUS steel, can be installed with a variety of different test fixtures. In order to meet the different standards of various tests.

Standards

ASTM D17900. EN ISO 20344. HG/T 2411. HG/T 2871. DIN 53351. SATR TM55. Adidas GE-24. GE-57. GB/T 20991-2007 and other standards

Product Advantages

Controlled Low-Temperature Environment: Provides a stable and precise cold environment for conditioning and testing.

Versatile Material Testing: Suitable for testing a wide range of footwear materials and finished shoes.

Standard Compliant: Designed to meet numerous national, international, and industry-specific standards for cold resistance testing.

Accommodates Various Tests: Can be equipped with different fixtures to perform various low-temperature tests (e.g., cold flex, cold impact, thermal insulation).

Wide Temperature Range: Capable of reaching very low temperatures, covering a broad range of cold climate conditions.

Accurate Temperature Control: Features balanced temperature control with high accuracy, uniformity, and minimal fluctuation.

Durable Construction: Made from rust-resistant stainless steel.

Includes Thermal Test Fixture: Equipped with components for conducting low-temperature thermal tests.

Main Parameters

1. Balanced temperature regulator humidity control system

2. Temperature range: -25℃ —— +150℃

3. Temperature fluctuation: ≤±0.5℃

4. Temperature uniformity: ≤2℃

5. Temperature accuracy: ±0.2℃

6. Heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load

7. Cooling time: +25℃→-40℃ room temperature to -40℃ about 50 minutes no load

8. Lead hole: φ50mm 1 (with 1 rubber plug)

9. Heating rate: 3 —— 5℃/min(average)， cooling rate: 0.7 —— 1℃/min(average)

Other supplier products

	Tabletop Xenon Arc Weathering Tester	Get a quote: Whats/App: +86 181 0160 0864 The Water-Cooled Xenon Lamp Weathering Test Chamber is a premium environmental simulation testing devic...
	Elmendorf Tearing Strength Testers	Get a quote: Whats/App: +86 181 0160 0864 G008 Manual Tearing Tester, The Elmendorf tear method can be used to test the force required to extend ...
	Martindale Abrasion And Pilling Tester	Getaquote: Whats/App: +86 181 0160 0864 Martindale Abrasion & Pilling Tester To determine the abrasion and pilling resistance of all kinds of...
	Shoe Shank Stiffness Tester SATRA TM256	Standard SATRA TM256: Flexural and torsional stiffness testing for athletic, safety, and casual footwear. SATRA TM194: Dynamic fatigue resistance...
	Battery Isothermal Calorimeter	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Battery Isothermal Calorimeter is a professional instrument developed based on the...

Same products

	Bottle Wall and Bottom Thickness Tester	Seller: Standard International Group (HK) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Seller: Standard International Group (HK) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Seller: Standard International Group (HK) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Seller: Standard International Group (HK) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Seller: Standard International Group (HK) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...