Shoelace Abrasion Tester SATRA TM154

Standards

SATRA TM93、DIN-4843、QB/T2226、SATRA TM154

Principle

Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eyelet form into 90 degree, make the fiber board and shoelace form into 45 degree. Then straining reciprocated the shoelace under the standard tension by eyelet. While the shoelace is damaged, stop the testing.

Product Advantages

Measures Key Durability of Lacing System: Evaluates the wear resistance of both shoelaces and eyelets, critical for footwear performance and lifespan.

Standard Compliant: Designed to meet standards like SATRA TM93. ensuring recognized and comparable test results.

Quantitative Result: Provides objective data, typically the number of cycles to failure.

Controllable Test Parameters: Allows for precise setting and control of tension, stroke length, and test speed.

Multiple Testing Stations: Equipped with multiple positions (6) for simultaneous testing, increasing efficiency.

Simulates Realistic Abrasion: The setup and reciprocating motion simulate the rubbing action that occurs during footwear use.

Versatile Application: Suitable for testing various types of shoelaces and eyelets.

Product Features

Multiple test positions or stations (6 positions) for simultaneous testing of multiple shoelace-eyelet pairs.

Mechanism to securely clamp a standard eyelet mounted on a fiberboard.

System to position the shoelace and eyelet at specified angles (90 degrees and 45 degrees).

Tensioning system that applies a standard load to the shoelace using weights (455g ± 5g per position, 6 weights included).

Mechanism to reciprocate the shoelace back and forth through the eyelet with a controlled movable stroke (76 ± 2 mm).

Controllable test speed (100 ± 5 cpm) for the reciprocating motion.

Touch-screen control interface for setting test parameters and monitoring the test.

Integrated digital counter (0-999.999 range) to track the number of abrasion cycles performed.

Designed to utilize standard eyelets (Brass, Inner diameter: 4.5mm) and fiberboard (25$times$25mm, Inner diameter 5.0 ± 0.2mm).

Robust construction suitable for repetitive abrasion testing.

Application

This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abrasion testing. This tester is suitable for all kinds of shoelace and eyelet.

Parameters

Position：6 positions

Weights：455g ± 5g , 6pcs

Control method：Touch-screen control, 0~999.999

Standard eyelet：Brass, Inner diameter: 4.5mm

Fiberboard：25×25mm, Inner diameter 5.0 ± 0.2mm

Movable stroke：76 ±2 mm

Test speed：100±5cpm

Power supply：1∮AC 220V 50/60HZ

Dimensions(W×D×H)：57x58x1025px

Weight(approx.)：60 kg(excluding weight)

Other supplier products

	Industrial chillers	Applicable Standards Industrial chillers adhere to global safety and performance regulations, including: ASHRAE 15(Safety Standard for Refrig...
	Qinsun 440	Standard The Qinsun 440 is engineered to meet stringent international testing standards, including ASTM G155, ISO 105 B02, SAE J2412, and IEC 68...
	Leather water vapor permeability tester | Water Vapour Permeability Tester	Productinformation The vaporpermeability of leather is evaluated by means of measuring the weight of water-vapor that permeates to specimen peruni...
	DSC Differential Scanning Calorimeter / Differential Scanning Calorimeters	The Differential Scanning Calorimeter (DSC) measures the heat flow to or from a sample under controlled heating conditions. A small amount of sampl...
	Density Gradient Column Apparatus丨Density Gradient Column System	Scope of application: Used for the measurement of density and relative density of plastics and other materials, the instrument adopts the Archimed...

All supplier products

Same products

	Bottle Wall and Bottom Thickness Tester	Seller: Standard International Group (HK) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Seller: Standard International Group (HK) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Seller: Standard International Group (HK) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Seller: Standard International Group (HK) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Seller: Standard International Group (HK) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...