Shoelace Abrasion Tester SATRA TM154
Standards
SATRA TM93、DIN-4843、QB/T2226、SATRA TM154
Principle
Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eyelet form into 90 degree, make the fiber board and shoelace form into 45 degree. Then straining reciprocated the shoelace under the standard tension by eyelet. While the shoelace is damaged, stop the testing.
Product Advantages
Measures Key Durability of Lacing System: Evaluates the wear resistance of both shoelaces and eyelets, critical for footwear performance and lifespan.
Standard Compliant: Designed to meet standards like SATRA TM93. ensuring recognized and comparable test results.
Quantitative Result: Provides objective data, typically the number of cycles to failure.
Controllable Test Parameters: Allows for precise setting and control of tension, stroke length, and test speed.
Multiple Testing Stations: Equipped with multiple positions (6) for simultaneous testing, increasing efficiency.
Simulates Realistic Abrasion: The setup and reciprocating motion simulate the rubbing action that occurs during footwear use.
Versatile Application: Suitable for testing various types of shoelaces and eyelets.
Product Features
Multiple test positions or stations (6 positions) for simultaneous testing of multiple shoelace-eyelet pairs.
Mechanism to securely clamp a standard eyelet mounted on a fiberboard.
System to position the shoelace and eyelet at specified angles (90 degrees and 45 degrees).
Tensioning system that applies a standard load to the shoelace using weights (455g ± 5g per position, 6 weights included).
Mechanism to reciprocate the shoelace back and forth through the eyelet with a controlled movable stroke (76 ± 2 mm).
Controllable test speed (100 ± 5 cpm) for the reciprocating motion.
Touch-screen control interface for setting test parameters and monitoring the test.
Integrated digital counter (0-999.999 range) to track the number of abrasion cycles performed.
Designed to utilize standard eyelets (Brass, Inner diameter: 4.5mm) and fiberboard (25$times$25mm, Inner diameter 5.0 ± 0.2mm).
Robust construction suitable for repetitive abrasion testing.
Application
This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abrasion testing. This tester is suitable for all kinds of shoelace and eyelet.
Parameters
Position：6 positions
Weights：455g ± 5g , 6pcs
Control method：Touch-screen control, 0~999.999
Standard eyelet：Brass, Inner diameter: 4.5mm
Fiberboard：25×25mm, Inner diameter 5.0 ± 0.2mm
Movable stroke：76 ±2 mm
Test speed：100±5cpm
Power supply：1∮AC 220V 50/60HZ
Dimensions(W×D×H)：57x58x1025px
Weight(approx.)：60 kg(excluding weight)
在线联系供应商
Other supplier products
 |
Print rub tester / Ink Rub Tester | Product Introduction: Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products ... |
 |
Geotextile Effective Aperture Tester丨Geotextile Test Machine | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by dry screening method. The geotextile s... |
 |
Yellowing resistance test chamber | Durable & Reliable | Applicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white pro... |
 |
Launder-Ometer Washing Fastness Tester | Textile Testing Products | Testing Standards: ISO 105 C01 C02 C03 C04 C05 C06 C08 D01. BS 1006 C01 C02 C03 C04 C05. AATCC 28 61 86 132 151 190. NEXT TM2 3 5. M&S C4 C5 C... |
 |
Scrub Abrasion Tester | Abrasion and Washability Tester | T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
