Ross Flex Tester / Ross Flexing Apparatus / Flex Tester
Product Introduction:
The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is directly above the center of the rotating shaft of the ROSS zigzag test machine, and drove the test piece to perform free 90-degree zigzag on the shaft through the ROSS zigzag test machine. After a certain number of tests, the length of the test piece incision is measured. The zigzag resistance of the test piece was evaluated by the size of the notch growth rate.
Reference standard:
GB/T2099-2007. ASTM-D1052. ISO-5423. SATRA TM60. HB-T2411HG/ T2411 and other standards
Product Advantages:
Measures Key Durability: Quantifies the resistance of sole materials to flex cracking and notch growth, a vital indicator of footwear lifespan.
Standard Compliant (ROSS Method): Designed to meet numerous relevant international and national standards (ASTM D1052. SATRA TM60. etc.) specifically for the ROSS flex test.
Quantitative Result: Provides objective data based on the measured growth rate of the pre-cut notch.
Multiple Testing Stations: Allows simultaneous testing of multiple test pieces (12), significantly increasing testing efficiency.
Controllable Test Parameters: Enables precise setting and control of the bending angle (90$pm$2º) and flexing speed (0-100 r/min).
Automatic Stop Function: Can be set to stop automatically after a specified number of test cycles.
Suitable for Sole Materials: Specifically designed for evaluating the flex fatigue characteristics of sole strips.
Random configuration:
1. One machine
2. 1 knife die
3. One power cable
4. One cutting knife
5. One copy of instructions
6. One delivery note
Technical parameters:
1. simultaneous measurement: (12 test pieces)
2. bending Angle: 90±2º
3. speed: 0-100r/min can be switched.
4. controller: LED-SLD806 integrated display control function
5. hole punch: 2.5mm
6. Test mode; Automatic stop when the test time is reached
7. fixture features: can test the sole at the same time can test pieces
8. zigzag shaft diameter: 10mm.
9. sample method: sole test piece
10. sample size: 152×25mm
11. Power supply: AC220V,10A
Send product request
Other supplier products
 |
Textile Point-to-Point Resistivity Tester / Textile and Apparel | Product Information: It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "S... |
 |
ink abrasion tester / Ink Abrasion Resistance Tester Ink Rub Tester | Ink abrasion testerPrinciple: To be ground layer and Friction Paper of the Ink Abrasion tester samples, under the action of the load friction body... |
 |
Electronic geosynthetics comprehensive strength machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The electronic geosynthetics comprehensive strength testing machine is a device us... |
 |
Liquid Sustained Combustion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk This product complies with "Recommendations on the Transport of Dangerous Goods - ... |
 |
Random Tumble Pilling Tester | Getaquote: Whats/App: +86 181 0160 0864 The Random Tumble Pilling Tester is a precision instrument specifically designed to test the pilling perf... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
