Pumpability tester EN 12723 ISO 5198
Product Introduction
The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield construction. It is an integrated and innovative instrument and equipment of China Railway No. 5 Institute combined with American standards and domestic capillary rheometer. The equipment is made by Changchun Intelligent and used in Beijing Railway No. 5 Institute, with good overall use. At present, the equipment has been used in the polymer laboratory of China Railway Construction in South China. The scale use of the equipment greatly improves the overall performance of the domestic shield tail sealing grease, and provides an effective testing equipment for the further development of the product.
standards
GB/T 3216
GB/T 29531
JB/T 8097
EN 12723
ISO 5198
Performance parameters
- Temperature range: 20——50℃±1℃(optimize temperature control system, improve insulation measures)
- Heating rate: 1-5℃/min, continuously adjustable
- Temperature measurement accuracy: computer display <±0.5℃， resolution: 0.1℃
- Pressure range: 0.5——5Mpa
- Pressure measurement accuracy: 0.05Mpa
- Rated load of the sensor: 5KN
- Load measurement accuracy: ±0.5%FS
- Load force resolution: 0.1N
- Displacement measuring range: <250mm
- Displacement measurement resolution: 0.06mm
- Loading speed setting: 0.01-500mm/min
- Die size: Φ3.8(mm)
- Die roughness: Ra0.4
- Capillary internal roughness: Ra1.6
- Die material: 304
- Plug head diameter: Φ44.83mm
- Power supply: 220V, 50Hz power <1500W
- Dimensions: 580×440×1800mm
Send product request
Other supplier products
 |
Film punching machine ASTM | Meet the standard: GB/T1528; GB/T529; GB/T8083; GB/T 15340.ASTM Technical parameters: Travel range :100mm Blanking force: about 20kN Table siz... |
 |
Carbon Black Content Tester / Carbon Black Content Apparatus | Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and ash ... |
 |
Geotextile wear tester丨Geotextile Test Machine | Scope of application: The wear resistance of geotextile and its related products was measured by emery cloth-sliding block method. During the expe... |
 |
Qinsun SUNTEST XLS+ | Modern desktop models, ideal instruments for 3D samples, equipped with various easy-to-use accessories, allowing SUNTEST to meet your different n... |
 |
Mask BFE Testing Machine - G299 丨Mask Bacterial Filtration Efficiency Tester | Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features 1. ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
