Pumpability tester EN 12723 ISO 5198
Product Introduction
The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield construction. It is an integrated and innovative instrument and equipment of China Railway No. 5 Institute combined with American standards and domestic capillary rheometer. The equipment is made by Changchun Intelligent and used in Beijing Railway No. 5 Institute, with good overall use. At present, the equipment has been used in the polymer laboratory of China Railway Construction in South China. The scale use of the equipment greatly improves the overall performance of the domestic shield tail sealing grease, and provides an effective testing equipment for the further development of the product.
standards
GB/T 3216
GB/T 29531
JB/T 8097
EN 12723
ISO 5198
Performance parameters
- Temperature range: 20——50℃±1℃(optimize temperature control system, improve insulation measures)
- Heating rate: 1-5℃/min, continuously adjustable
- Temperature measurement accuracy: computer display <±0.5℃， resolution: 0.1℃
- Pressure range: 0.5——5Mpa
- Pressure measurement accuracy: 0.05Mpa
- Rated load of the sensor: 5KN
- Load measurement accuracy: ±0.5%FS
- Load force resolution: 0.1N
- Displacement measuring range: <250mm
- Displacement measurement resolution: 0.06mm
- Loading speed setting: 0.01-500mm/min
- Die size: Φ3.8(mm)
- Die roughness: Ra0.4
- Capillary internal roughness: Ra1.6
- Die material: 304
- Plug head diameter: Φ44.83mm
- Power supply: 220V, 50Hz power <1500W
- Dimensions: 580×440×1800mm
在线联系供应商
Other supplier products
 |
Resistance Tester for Protective Clothing / Protective Clothing Tester | Standards: GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-static Per... |
 |
Catheter Hydraulic Leakage Tester | Compliance Standards GB/T 15812.1. etc. Main Uses The catheter hydrostatic pressure resistance and leakage tester is a device specifically desig... |
 |
Scott Flex Tester | Textile Testing Products | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials. One end o... |
 |
High and low temperature universal creep testing machine | Product Introduction: High and low temperature universal creep testing machine is mainly used for non-metallic materials creep, stress relaxation,... |
 |
Geosynthetics Horizontal Penetration Tester丨Geotextile Test Machine | Scope of application: Used to determine the horizontal permeability of geosynthetics under constant head flow conditions. Under the conditions of ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
