Geosynthetic Clogging Tester丨Geotextile Test Machine
Scope of application:
The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile system and its interface under no-pressure conditions, and the mud content of geotextile is measured to determine whether the geosynthetic material is used as a filter layer of some soil, and whether the blockage is not allowed.
Meet the standard:
ASTM D5101-2006JTG E50 T1145-2006.SL/T . etc
Instrument features:
Suitable for all kinds of soil and geotextile;
Floor type design, stable fuselage structure, not easy to deformation:
Plexiglass test chamber can visually observe the silting process of geotextiles;
The seal of the specimen holding device in the test cylinder is good to ensure the feasibility of the test.
The height of the test cylinder is reasonable, and a certain space is reserved above the soil sample to make the water flow uniform and stable.
Manual rotary hand wheel drive, water level regulation, efficient and smooth:
6 pressure gauges for easy pressure observation and high measurement accuracy:
Easy to install, easy to operate.
Technical parameters:
Instrument type floor type
The inner diameter of the test cylinder is 100mm
The sample height is 100mm
Head difference adjustment range 0——1050mm
Head difference accuracy ±1mm
Support net aperture 6mm
Overall dimensions 450x400x980mm(LxWxH)
Weight 75kg
Send product request
Other supplier products
 |
Geomembrane Hydrostatic and Permeability Tester丨Geotextile Test Machine | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile (one cl... |
 |
Suitcases Vibration Impact Tester / Luggage Vibration Impact Tester | Product Introduction: This machine is used to test the shock resistance of various luggage handles, car stitches and overall structure. The method... |
 |
High and low temperature memory impact testing machine | Product Introduction: Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics,... |
 |
Snap Button Tester | Button Impact Tester | Standards: ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments). Applicati... |
 |
Fuel Contamination Test Dust | Product Introduction: Particle Technology UK offers a full range of materials used in fuel contamination tests, which are used to test the reliabi... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
