Sponge foam collapsible hardness tester / Sponge foam collapsible hardness machine

Purpose:

This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested according to the national standard, and the compressive hardness of sponge, foam and other materials can be accurately measured. In addition, it can also be used to measure the specified compression hardness of the seat foam (such as backrest, seat cushion foam, etc.)， and accurately measure the compression hardness of each foam part of the seat.

Standards:

ISO 2439: Flexible cellular polymeric materials — Determination of hardness (indentation technique)

ISO 3386-1: Polymeric materials, cellular flexible — Determination of stress-strain characteristic in compression

ASTM D3574:Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams

DIN 53576

JIS K6400-6

How it Works:

The sponge foam compression stress test puts the sample between the upper and lower pressure disks, and when the upper pressure disks compress the sample of A certain size down to the concave degree specified by the A method (B method, C method) required by the national standard at the specified speed, the load element on the load cell will feedback the induced pressure to the controller for processing and display, so as to measure the collapsibility hardness of the sponge, foam and other samples.

Functional characteristics：

1. Automatic zero clearing: After receiving the test start instruction, the system automatically clears zero.

2. automatic return: after the sample is broken, it will automatically return to the initial position.

3. change the speed: The machine can change the test speed arbitrarily according to different samples.

4. indicating value verification: the system can achieve the accurate calibration of force value.

5. control method: According to the test needs can choose the test force, test speed, displacement and other test methods.

Technical parameter：

1. control mode: touch screen control;

2. induction mode: precision load element;

3. capacity: 200kg;

4. unit switch: Kg, N, LB;

5. pressure plate: diameter 200mm, bottom rounded R1mm;

6. lower platform: 420×420mm, porosity diameter 6mm, spacing 20mm;

7. the maximum stroke: 75mm;

8. test speed: 100±20mm/min;

9. power source: servo motor;

10. transmission mode: precision ball screw;

11. power source: single-phase, 220V, 50Hz/60Hz, 2.5A;

12. Weight: 160kg.

Other supplier products

	Photovoltaic module outdoor exposure test system	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Photovoltaic Module Outdoor Exposure Test System is designed to simulate real-...
	Geosynthetics Horizontal Penetration Tester丨Geotextile Test Machine	Scope of application: Used to determine the horizontal permeability of geosynthetics under constant head flow conditions. Under the conditions of ...
	Vehicle-Level High/Low Temperature and Humidity Test Chamber	Get a quote： Whats/App: +86 181 0160 0864 TheVehicle-Level High/Low Temperature and Humidity Test Chamberis a large-scale environmental simulatio...
	Surface Performance Tester STD-FB4-A	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Surface Performance Tester is a high-precision instrument designed to quantify...
	Syringe needle flow tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of...

All supplier products

Same products

	Bottle Wall and Bottom Thickness Tester	Seller: Standard International Group (HK) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Seller: Standard International Group (HK) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Seller: Standard International Group (HK) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Seller: Standard International Group (HK) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Seller: Standard International Group (HK) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...