GD-3536A Automatic Cleveland Open Cup Flash Point Tester
Summary
This instrument is designed and made as perGB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland open cup methodandASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. It is applicable to all petroleum products with flash points above 79℃ and below 400℃ except fuel oils.
I. Main technical features
1. This instrument adopts LCD screen to display and full English man-machine interface. It can preset expected flash point temperature, sample mark number, barometric pressure and other parameters.It has menu prompt and input guide.
2. It adopts simulation tracking to display the function curve of temperature rising and test time. It has the functions of English mis-operation prompt,test date,test time and other parameters.
3. Automatically calibrate the effect of atmospheric pressure to test and calculate the corrected value.
4. Differential coefficient detection.Automatically correct the system deviation.
5. Automatically open the lid,detect the flash point and print test data.The test arm automatically rise up and lower down.
6. Beautiful design,safe and convenient to operate.
II. Main technical specifications
1. Power supply：AC220(-10%～+5%)V, 50Hz
2. Temperature measurement：Range：room temperature～400℃
Repeatability：≤8℃
Reproducibility：≤17℃
Accuracy：0.1℃
3. Heating rate：Correspond with GB/T3536 and ASTM D92
4. Ignition mode：Electric ignition.Gas flame diameter is 3.2mm～4.8mm
5. Ambient temperature：(10～40)℃
6. Relative humidity：≤80%
7. Maximum power consumption：400W
8. Dimension：410mm×360mm×310mm
Send product request
Other supplier products
 |
GD-0609 Asphalt Thin Film Oven | I. Summary The GD-0609 Asphalt Thin Film Oven(82 type oven for short) is design and made as per T0609-1993 Thin Film Oven Test in the industry stan... |
 |
GD-261 Pensky-Martens Closed Cup Flash Point Tester | Summary This instrument is designed and manufactured as per standardsGB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup methoda... |
 |
GDGS Tan Delta Test Set for Electrical Equipments | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
 |
GDJ-1B Rotational Viscometer | I. Summary The instrument adopts advanced mechanical design technology, manufacture technique and microcomputer controlling technology.It can coll... |
 |
GDVA-402 CT PT Testing Equipment | GDVA-402 CT/PT TesterI Brief IntroductionGDVA-402CT/PT tester is a specialtester for testing characteristic of CT and PT. TheTester can finish CT/... |
Same products
 |
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... |
 |
Hast Pct High-Low Temperature Test Chamber with Pressure | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali... |
 |
Programmable Hast Accelerated Aging Tester for Industry | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ... |
 |
CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard | Seller: AI SI LI (China) Test Equipment Co., Ltd. | CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th... |
 |
Package Large Scale Simulation Transportation Vibration Tester | Seller: AI SI LI (China) Test Equipment Co., Ltd. | This machine is used to simulation testing damage between transport for various package stuff, PC... |
