GD-265H Intelligent Kinematic Viscometer
Summary
This instrument is designed and made as per the industry standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petroleum Products Kinematic Viscosity Tester,GB/T 265 Petroleum products-Determination of kinematic viscosity and calculation of dynamic viscosityandASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids. It is suitable to determine kinematic viscosity of liquid petroleum products (Newtonian fluids) by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer at a constant temperature.
I. Main technical features
1. Single chip microcomputer and colored LCD technology. High intelligenceand automation.
2. Intelligent signal sampling, data measuring, parameters operating, and result output. All the operations are finished automatically.English man-machine conversation interface. Easy to operate.
3. The instrument is equipped with timing function. It can choose valid flowing time period and calculate arithmetic average automatically. It can also preset the viscosity coefficient , calculate the viscosity after the test and print the test results automatically.
4. It can do one test alone or doing two tests at one time by setting the parameters.High efficiency.
5. It has the parameters saving function. The instrument will automatically save the parameters of capillary tube diameter, coefficient and so on after these parameters being setted. When doing test with the same capillary, no need to set these parameters again.
6. It adopts desktop and all-in-one machine design. Convenient to use.
II. Main technical specifications
1. Power supply：AC(220±10%)V, 50Hz
2. Bath heating power：1700W
3. Temperature range：Room temperature～100.0℃
4. Temperature control accuracy：±0.01℃
5. Bath volume：20L
6. Timing range： 0.0s～9999.9s
7. Timing accuracy： ±0.05% within 60min
8. Amount of capillary viscometer tubes： 4 capillary viscometers
9. Stirring motor： Power 6W, rotating rate 1200RPM
10.Working condition： ambient temperature-10℃～35℃, RH: ≤85％
11.Temperature sensor： RTD, Pt100
12.Maximum power consumption： 1800W
13.Capillary viscometers tubes(Pinkevitch viscometer)： 7 pieces in total.The inner diameter for each: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
14.Dimension： 530mm×400mm×670mmzhi
Send product request
Other supplier products
 |
Automotive Oil Kinematic Viscometer for Kinematic Viscosity from -40 to +100C | Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’... |
 |
Gdva-402 Current and Potential Transformer Analyzer, CT/PT Analyzer | 1.1Introduction GDVA-402 CT/PT Analyzer is a special instrument for testing characteristic of CT and PT .The tester can finish CT/PT transformation... |
 |
GDJ-1E Rotational Viscometer | I. Summary The instrument is one of the upgraded products in our company. Adopting the advanced mechanical design technology, the manufacture techn... |
 |
GD-261D Fully-automatic Pensky-Martens Closed Cup Flash Point Tester | Summary This instrument is designed and manufactured as per standardsGB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup methoda... |
 |
GDGS Tan Delta Automatic Dielectric Loss Tester | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
Same products
 |
WF-EDU-02 Motor & Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
 |
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... |
