Positive Quick Release Drop Tester For Package Drop Test Lock Design
Quick Release Drop Tester for Larger, Bulkier Test Items
Introduction
The KDT2000 Drop Tester is designed to simulate the drops and mechanical hazards that occur in distribution. It is especially suited to very large, heavy payloads which cannot be tested on conventional drop test machines.
The KDT2000 consists of a quick-release mechanism, lifting ring, and foot-switch for initiating the drop. Straps wrapped around the test item form a sling that attached to the O type ring, which is placed in the latch jaws of the quick-release mechanism. The quick-release mechanism and test package are then lifted to a pre-determined height by a fork-lift, winch, or other lifting device (not included). Press the Remote Foot-switch causing the latch jaws to open and the package to fall.
Technical Specification
Weight Capacity: 200kg~1500kg
Power Required: AC220V / 50Hz ( or according to customer’s need)
Compressed Air: 0.5Mpa~0.7Mpa
Lifting Device: Customer Supplied
Weight of KDT2000 : 11kg ( excluding foot-switch, which is 5kg)
Size of KDT2000: 345 x 235 x 145 mm
Size of foot-switch: 270 x 200 x220 mm ( Lx D x H)
Detailed Picture
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case,which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless,moisture corrosion, good transparency etc
Our products have been exported to USA, Mexico, Colombia, Argentina, Dubai, Saudi Arabia, the Philippines, Indonesia, Malaysia, Vietnam, India and other countries.
We warmly welcome customers from domestic and overseas to cooperate with us formutualbenefit.
Send product request
Other supplier products
Vertical / Horizontal Vibration Test System 1 Ton Rated Force | Applicable Standards:MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc. Key Applications: Automotive parts and systems - qualification t... | |
Simple Operation Small Mechanical Shaker Table 15-60 Hz For Product Research | Simple Operation Small Vibration Shaker Table For Product Research Economy mechanical vibration test machine Application Standard vibration s... | |
32kN Sine and Random Force Vibration Test System 1400*900*1100 mm , 500 kg Payload | Vibration testing is done to introduce a forcing function into a structure, usually with the use of a vibration test shaker or vibration testing m... | |
Mutil - Function Mechanical Shaker Table 2~5Hz ( 120~300 ) RPM Frequency | Packaging Transportation Vibration Test Equipment Vibration Simulator Product Description Transportation Simulators mainly applied to conform to I... | |
Simple Operation Small Mechanical Shaker Table 15-60 Hz For Product Research | Simple Operation Small Vibration Shaker Table For Product Research Economy mechanical vibration test machine Application Standard vibration s... |
Same products
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... | |
Hast Pct High-Low Temperature Test Chamber with Pressure | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali... | |
Programmable Hast Accelerated Aging Tester for Industry | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ... | |
CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard | Seller: AI SI LI (China) Test Equipment Co., Ltd. | CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th... | |
Package Large Scale Simulation Transportation Vibration Tester | Seller: AI SI LI (China) Test Equipment Co., Ltd. | This machine is used to simulation testing damage between transport for various package stuff, PC... |