Building material burning performance tester
According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products.Applicable to category B, C, D, E, Bfl, Cfl, Dfl and Efl related to building material testing, the unit provides a comprehensive solution for ease of use by the operator.
Building material burning performance testing machine meet the standards: EN ISO 11925-2, DIN 53438, DIN4102-1, GB / T 8626 and other standards.
Building material burning performance testertechnical parameters:
1, stainless steel structure box;
2, the inlet burner diameter Φ0.17mm, there are four Φ4 mm air conditioning holes;
3, the flame height adjustable, automatic ignition;
4, the flame application time and fuel time can be 0 to 99 minutes and 99 seconds to adjust;
5, gas pressure: 10KPa-50 KPa;
6, burning angle: 0 ° (vertical), 45 °
7, through the chassis outside the debug handle, the burner can move in the horizontal direction;
8, tempered glass door easy to observe the test;
9, stainless steel sample holder and sample template;
10, equipped with two kinds of stainless steel sample clip.Flame height gauge;
11, a high degree of experimental automation, experimental data accurate, easy to operate;
Building material burning performance testercontrol system:
1, programmable controller (PLC) control:
2, automatic timing, automatic detection of flame, automatic ignition, ignition abnormal protection;
3, optional automatic detection of wind speed, 6 samples of experimental data preservation;
4, the text display display;
5, real-time monitoring of experimental data, query 6 experimental data, query the alarm content.
6, the experimental abnormal sound alarm.
Send product request
Other supplier products
 |
ASTM F2101 bacterial Filtration Efficiency (BFE)Tester | Medical face mask Bacterial filtration efficiency Tester can quickly and accurately measure the filtration efficiency of filtration protection equi... |
 |
Safety Glove Cutting Resistance Testing Machine and tester | Glove anti - cutting performance testing machine for testing the upper, protective gloves, leather and other materials, cutting strength, suitable ... |
 |
Mask Respirator Breathing Resistance Tester | Mask respiratory resistance tester is used to measure the respiratory resistance and expiratory resistance of respirators and masks under the speci... |
 |
fogging test equipment | Fogging tester is used to determine the windscreen fogging according to ISO, DIN, ASTM and other automotive standards. The equipment has a compact ... |
 |
Cone Calorimeter | A cone calorimeter is a fire test tool that is based on the amount of heat released during the combustion process directly related to the oxygen co... |
Same products
 |
WF-EDU-02 Motor & Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
 |
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... |
