Safety Glove Cutting Resistance Testing Machine and tester
Glove anti - cutting performance testing machine for testing the upper, protective gloves, leather and other materials, cutting strength, suitable for safety gloves protection area knife-resistant test, but not for those very hard material gloves.
The instrument is suitable for testing protective glove protection zone strength test, using the blade under the specified load to do reciprocating motion for the principle, in line with ISO20344 6.14 and EN388.6.2 standards.
Test criteria:
EN ISO 20344, GB / T 20991, EN 388, EN 340
Detection principle:
A rotating circular blade is cut and placed on a dedicated sample device. The blade is reciprocated under a specified load, automatically counted, the test is automatically stopped, and the difference between the test before and after the test is made. Test Results.
Technical Parameters:
1. Number of test samples: 1 group;
2. Horizontal movement displacement: 50mm;
3. Blade rotation direction: the opposite direction of motion;
4. Blade cutting speed: maximum 10cm / s;
5. Load on blade: 5 ± 0.05 N;
6. Round blade size: diameter 45 ± 0.5mm, thickness 3 ± 0.3mm;
7. Total cutting angle: 30 ° -35 °;
8. Blade material: hard tungsten steel, hardness of 740-800HV;
9. Dimension: 550 × 400 × 250mm (L × W × H);
10. Counter: LCD liquid crystal display, 0 ~ 99,999,999;
11. Weight: 57.5kg;
12. Power: 220V 50Hz;
Other supplier products
|
AATCC 195 Moisture Management Tester |
Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Moisture management tester is the tool for the measurement, evaluation and classification of... |
|
Face Mask Airflow Respiratory resistance tester |
Disposable mask airflow resistance tester can be used to determine the inspiratory and expiratory resistance of masks under specified conditions.An... |
|
fabric labratory gas fume chamber |
Gas fume chamber is designed to test the color fastness of fabric exposed to nitrogen oxide produced by gas combustion. The testerIncludes test cha... |
|
Fabric Negative-ion Concentration Tester |
The negative ion generation tester is mainly used to detect the negative ion generation of textiles, and evaluate the negative ion generation capac... |
|
Hexapod Tumbler Tester |
Hexapod Tumbler Tester
Standards ofHexapod Tumbler Tester:
BS EN 1471: 1997,ISO 9405: 2001
IWS test methods 247 & 251,ISO 10361: 2000 (BS)
Wool... |
All supplier products
Same products