KRD11 Pneumatic Vertical Shock/Bump Test System
KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and collision test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests.
Pneumatic drive, simple structure and high reliability
Pollution free, without hydraulic leak risk and keep the environment clean.
Pneumatic drive greatly improves the shock test efficiency, maximum shock rate up to 120 times / min.
It can easily realize large pulse width and small overload test.
With a fast shock rate comparing to motor or hydraulic driven collision table, it has higher reliability and better collision waveform.
The speed and rate of shock can be easily controlled by adjusting the gas pressure.
KRD90 series shock control and measurement system can perform manual shock, continuous shock, single shock, and interval shock.
Built-in brake mechanism ensures the safety of operation in any situation.
Technical Specifications
|
Model Parameters |
KRD 11－5 |
KRD 11－15 |
KRD 11－25 |
KRD 11－50 |
KRD 11－100 |
KRD 11－200 |
KRD 11－400 |
KRD 11－600 |
KRD 11－800 |
KRD 11－1000 |
KRD 11－2000 |
|
|
Rated Load (kg) |
5 |
15 |
25 |
50 |
100 |
200 |
400 |
600 |
800 |
1000 |
2000 |
|
|
Table Size (mm) |
150×150 |
200×200 |
300×300 |
500×500 |
600×600 |
800×600 |
800×800 |
1000×800 |
1000×1000 |
1200×1200 |
1500×1200 |
|
|
Peak Acc. (g) |
Half-Sine |
5-2500 |
5-2000 |
5-1500 |
10-750 |
10-600 |
10-450 |
10-400 |
10-300 |
10～300 |
10～250 |
10～150 |
|
Post-Peak Sawtooth |
10-200 |
10-100 |
10-50 |
|||||||||
|
Trapezoid |
/ |
15-200 |
15-100 |
15-60 |
15-50 |
|||||||
|
Pulse Duration (ms) |
Half-Sine |
|
2～60 |
|
3～60 |
|
4～60 |
|
6～60 |
|||
|
Post-Peak Sawtooth |
3～18 |
6～18 |
||||||||||
|
Trapezoid |
/ |
3～18 |
6～18 |
|||||||||
|
Bump Waveform (Optional) |
Half-sine Waveform |
|||||||||||
|
Bump Peak Acceleration （g） |
5~150 |
5~120 |
5~100 |
5~80 |
5~60 |
5~40 |
/ |
|||||
|
Bump Pulse Duration (ms) |
2~30 |
3~30 |
4 ~ 30 |
5 ~ 30 |
/ |
|||||||
|
Bump Rate (Times/Min) |
10~120 |
10~100 |
10~80 |
10~60 |
10~40 |
10~30 |
/ |
|||||
|
Overall Dimension (mm) |
1000×1000 ×2100 |
1000×1000 ×2160 |
1510×1300 ×2400 |
1690×1240 ×2350 |
1710×1160 ×2350 |
1910×1500 ×2700 |
1910×1500 ×2500 |
1900×1500 ×2450 |
2000×1500 ×2450 |
1900×1800 ×2550 |
2200×1800 ×2550 |
|
|
Weight (kg) |
1300 |
2300 |
3000 |
3070 |
3900 |
4500 |
5000 |
5200 |
5600 |
6200 |
7300 |
|
|
Working Environment |
Temperature range 0 ~ 40℃, Humidity≤80% (non-condensing) |
|||||||||||
|
Power |
1-phase AC220V±10% 50Hz |
|||||||||||
|
Air source |
≤0.8MPa |
|||||||||||
|
Installation Condition |
Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment |
|||||||||||
|
Standards |
MIL-STD-810F IEC68-2-27 MIL-STD-202 MIL-STD-750 MIL-STD-883 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580 |
|||||||||||
Send product request
Other supplier products
 |
High Acceleration Shock Test Machine | KRD13 series high acceleration shock test system is specially designed to meet the requirements of military industry and home appliances. The syste... |
 |
Double lift zero-distance drop test machine | KRD42 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and uni... |
|
|
KRD11 Pneumatic Vertical Shock/Bump Test System | KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operatio... |
 |
KRD14 Pneumatic Vertical Shock Response Spectrum Test System | KRD14 series pendulum shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or... |
 |
KRD42 Double lift zero-distance drop tester | KRD42 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and uni... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
