KRD13 High Energy Shock Test System
KRD13 series high enwergy shock test system is specially designed to meet the requirements of military industry and home appliances. The system adopts the principle of pneumatic energy storage expansion. By adjusting the inflation pressure, various high-level acceleration tests can be easily implemented in a short stroke.
For the classic drop test, it’s equipped with the corresponding shock amplifier to complete drop test.
l Windows-based stable control system, full-automatic remote-control interface
l Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
l Automatic control of lifting height with high accuracy and good repeatability
l Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
l The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator.
l Easy installation: the device comes with a base, due to short driving stroke of the pneumatic cylinder, the footprint is small.
Technical Specifications
|
Model Parameters |
KRD13－50 |
KRD13－100 |
KRD13－200 |
KRD13－500 |
KRD13－800 |
KRD13－1000 |
KRD13-2000 |
||
|
Rated Load (kg) |
50 |
100 |
200 |
500 |
800 |
1000 |
2000 |
||
|
Table Size (mm) |
500×500 |
600×600 |
800×800 |
1000×1000 |
1200×1200 |
1500×1500 |
2000×2000 |
||
|
Peak Acc. (G) |
Half-Sine |
10~1500 |
10-1000 |
10-500 |
10-400 |
10-300 |
10-200 |
||
|
Post-Peak Sawtooth |
10~200 |
10~100 |
10-50 |
||||||
|
Trapezoid |
15-200 |
15-200 |
15-100 |
15-100 |
15-60 |
15-50 |
30-50 |
||
|
Pulse Duration (ms) |
Half-Sine |
2～60 |
2～60 |
3～60 |
4～60 |
5～60 |
6～60 |
8～60 |
|
|
Post-Peak Sawtooth |
3～18 |
6～18 |
|||||||
|
Trapezoid |
3～18 |
6～18 |
|||||||
|
Bump Waveform |
Half Sine Waveform |
||||||||
|
Shock Peak Acceleration (g) |
5～100 |
||||||||
|
Shock Pulse Duration(ms) |
3～30 |
||||||||
|
Bump Rate (Times/Min) |
10-120 |
||||||||
|
Overall Dimension (mm) |
1200×1200×1500 |
1200×1200×1500 |
1200×1200×1500 |
1300×1300×1600 |
1500×1500×1700 |
1600×1600×1800 |
2000×2000×1900 |
||
|
Weight (kg) |
3000 |
3200 |
3400 |
4000 |
5000 |
6000 |
8000 |
||
|
Installation Condition |
Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
|||||||
|
Power |
AC220V±10%, 50Hz |
||||||||
|
Air source |
≤1MPa |
||||||||
|
Floor |
Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment |
||||||||
|
Standards |
MIL-STD-810F IEC68-2-27 |
||||||||
Send product request
Other supplier products
 |
KRD11 Pneumatic Vertical Shock/Bump Test System | KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operatio... |
 |
KRD41 New Design Small Drop Tester | KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile s, walkie-talkies, electr... |
 |
6-DOF(degree of freedom) Simulation Test Machine | KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges c... |
 |
Constant Acceleration Tester (Arm Type) | KRD31 series constant acceleration tester are used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-... |
 |
High Impact Shock Test Machine | High impact shock test system meets MIL-S-901D standard which covers shock testing requirements for ship board machinery, equipment, systems, and s... |
Same products
 |
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... |
 |
Hast Pct High-Low Temperature Test Chamber with Pressure | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali... |
 |
Programmable Hast Accelerated Aging Tester for Industry | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ... |
 |
CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard | Seller: AI SI LI (China) Test Equipment Co., Ltd. | CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th... |
 |
Package Large Scale Simulation Transportation Vibration Tester | Seller: AI SI LI (China) Test Equipment Co., Ltd. | This machine is used to simulation testing damage between transport for various package stuff, PC... |
