Pneumatic Bidirectional Vertical Shock Testing Machine
KRD17 series pneumatic bidirectional vertical shock test system is the new designed and developed for some large specimens that cannot or are not easy to turn over, especially for battery testing. It can complete vertical upward and downward shock tests.
l Windows-based stable control system, full-automatic remote-control interface
l Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
l Bidirectional vertical shock mechanism, to complete the upward and downward shock and bump tests.
l Automatic control of lifting height with high accuracy and good repeatability
l Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
l Built-in double-brake system, safe and reliable.
l IPS-2000 shock control and measurement system can performdifferent shock waveforms.
lOptional foundation free:Air springs and dampers are used to reduce vibration.
Technical Specifications
|
Model Parameters |
KRD17－50 |
KRD17－100 |
KRD17－200 |
KRD17－500 |
KRD17－800 |
KRD17－1000 |
KRD17－2000 |
|
|
Rated Load (kg) |
50 |
100 |
200 |
500 |
800 |
1000 |
2000 |
|
|
Table size (mm) |
500×500 |
600×600 |
800×800 |
1000×1000 |
1200×1200 |
1500×1500 |
2000×2000 |
|
|
Shock Direction |
Downward |
|||||||
|
Peak Acc. (G) |
Half-Sine |
10-750 |
10-600 |
10-450 |
10-300 |
10-250 |
10-200 |
10-150 |
|
Post-Peak Sawtooth |
10-200 |
10-200 |
10-100 |
10-100 |
10-100 |
10-100 |
10-100 |
|
|
Trapezoid |
15-200 |
15-200 |
15-100 |
15-100 |
15-60 |
15-60 |
15-50 |
|
|
Pulse Duration (ms) |
Half-Sine |
2-60 |
4-60 |
5-60 |
6-60 |
|||
|
Post-Peak Sawtooth |
3～18 |
6～18 |
||||||
|
Trapezoid |
3～18 |
3～18 |
6～18 |
|||||
|
Shock Direction |
Upward |
|||||||
|
Shock Wave |
Half Sine Wave |
|||||||
|
Shock Peak Acceleration (G) |
15-350 |
15-300 |
15-200 |
15-150 |
15-100 |
15-100 |
15-75 |
|
|
Shock Pulse Duration(ms) |
4-60 |
6-60 |
||||||
|
Overall Dimension (mm) |
1250×1250×1600 |
1250×1250×1600 |
1300×1300×1700 |
1350×1350×1750 |
1550×1550×1750 |
1650×1650×1850 |
2000×2000×1900 |
|
|
Weight (kg) |
3000 |
3200 |
3400 |
4000 |
5000 |
6000 |
8000 |
|
|
Power |
AC220V 土10%，50Hz |
|||||||
|
Air Source |
≤1MPa |
|||||||
|
Installation Conditions |
No special foundation is required for installation, but a smooth cement floor is required. 800 ~ 1000mm working distance are reserved around the equipment |
|||||||
|
Working Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
|||||||
|
Standards |
MIL-STD-810F IEC68-2-27 |
|||||||
Send product request
Other supplier products
 |
Pneumatic Horizontal Shock Response Spectrum Test Machine | KRD15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy to provide impact energy, push the shock hamm... |
 |
KRD42 Double lift zero-distance drop tester | KRD42 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and uni... |
 |
Pneumatic Horizontal Shock Test Machine | The KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the r... |
 |
KRD10 Hydraulic Vertical Shock Test System | KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to eva... |
 |
KRD40 Drop Test System | KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and uni... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
