KRD16 High Impact Shock Test System
High impact shock test system meets MIL-S-901D standard which covers shock testing requirements for ship board machinery, equipment, systems, and structures, excluding submarine pressure hull penetrations. The purpose of these requirements is to verify the ability of shipboard installations to withstand shock loadings which may be incurred during wartime service due to the effects of nuclear or conventional weapons.
CME provides lightweight & medium weight high impact shock test system in accordance with one of the following test categories, as specified.
- Lightweight. The lightweight test is a test performed on the lightweight shock machine. Weight of the test item including fixture to attach it to the test machine shall be less than 550 pounds.
- Medium weight. The medium weight test is a test performed on the medium weight shock machine. Weight of the test item including fixture to attach it to the test machine shall be less than 7,400 pounds.
Technical Specifications
|
Model Parameters |
KRD16-1 |
KRD16-2 |
|
Lightweight |
Medium weight |
|
|
Max Load (kg) |
200 |
3000（Including tooling≤3400） |
|
Pendulum Mass (kg) |
181 |
1342 |
|
Shock Form |
Preset energy automatic completion |
|
|
Drop Hammer Height (mm) |
0-1500 |
0-1870 |
|
Work Table Size (mm) |
4A (Flat plate) 860×570 |
1520×1520 |
|
4C-Ⅰ (Angle plate) 670×300 |
||
|
4C-Ⅱ (Angle plate) 670×300 |
||
|
4C-Ⅲ (Angle plate) 670×550 |
||
|
Overall Dimension (mm) |
4800×1400×4400 |
3650×3300×3200 |
|
Weight(kg) |
3500 |
15000 |
|
Power |
AC380V±10％50Hz 3kW |
AC380V±10％50Hz 20kW |
|
Working Environment |
Temperature range: 0～40℃, humidity≤80% (no condense) |
|
|
Standards |
MIL-S-901D |
|
Send product request
Other supplier products
 |
KRD32 Non-standard Constant Acceleration Tester | KRD32 series non-standard constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dua... |
 |
KRD11 Pneumatic Vertical Shock/Bump Test System | KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operatio... |
 |
Pneumatic Vertical Shock Response Spectrum Test Machine | KRD14 series pendulum shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or... |
 |
KRD41 New Design Small Drop Tester | KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile s, walkie-talkies, electr... |
 |
KRD100 Incline Impact Tester | KRD100 series incline impact tester simulates the ability of product packaging to resist shock damage in the actual environment, such as handling, ... |
Same products
 |
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... |
 |
Hast Pct High-Low Temperature Test Chamber with Pressure | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali... |
 |
Programmable Hast Accelerated Aging Tester for Industry | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ... |
 |
CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard | Seller: AI SI LI (China) Test Equipment Co., Ltd. | CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th... |
 |
Package Large Scale Simulation Transportation Vibration Tester | Seller: AI SI LI (China) Test Equipment Co., Ltd. | This machine is used to simulation testing damage between transport for various package stuff, PC... |
