Hydraulic Vertical Shock Test Equipment
KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products in a shock environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests to achieve the shock wave and impact energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure.
l Windows-based stable control system, full-automatic remote-control interface
l Multi-track guide posts combined with good lubricity and noise free hydraulic balance lifting system to achieve stable shifting
l Automatic control of lifting height with high accuracy and good repeatability
l Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
l Built-in brake mechanism to avoid secondary rebound collisions and more secure positioning of the table
l Multiple waveforms: it can perform conventional half-sine waves, post-peak sawtooth waves, or square waves
l The self-buffer & vibration isolation base does not require a special foundation, and easy to install
l One-stop test: built-in test standards meet various requirements to help users to complete test in one stop
Technical Specifications
Model Parameters |
KRD 10-2 |
KRD 10-5 |
KRD 10-25 |
KRD 10-50 |
KRD 10-100 |
KRD 10-200 |
KRD 10-400 |
KRD 10-600 |
KRD 10-1000 |
KRD 10-1500 |
|
Rated Load (kg) |
2 |
5 |
25 |
50 |
100 |
200 |
400 |
600 |
1000 |
1500 |
|
Table Size (mm) |
115×115 |
200×200 |
300×300 |
500×500 |
600×600 |
800×600 |
1000×800 |
1000×1000 |
1200×1000 |
1500×1200 |
|
Peak Acc. (g) |
Half-sine |
5~3k |
20~2K |
15~3k |
15~600 |
15~600 |
15~300 |
15~200 |
|||
Post-peak Sawtooth |
10~100 |
15~100 |
15~200 |
15~100 |
10~50 |
||||||
Trapezoid |
15~100 |
15~50 |
|||||||||
Pulse Duration (ms) |
Half-sine |
1~30 |
1~30 |
1~30 |
2~30 |
6~30 |
|||||
Post-peak Sawtooth |
1~18 |
1~18 |
3~18 |
3~18 |
3~18 |
6~18 |
|||||
Trapezoid |
6~18 |
||||||||||
Overall Dimensions (mm) |
450× 180× 2100 |
1000× 900× 2200 |
1400× 120× 2300 |
1600× 1400× 2300 |
1700× 1500× 2300 |
1700× 1500× 2300 |
1900× 1500× 2450 |
2000× 1500× 2450 |
1900× 1800× 2550 |
2200× 1800× 2550 |
|
Weight (kg) |
350 |
550 |
1200 |
3000 |
3100 |
3800 |
4200 |
5100 |
7100 |
8500 |
|
Power |
None |
AC220V 50/60Hz |
AC380V±10%,50/60Hz |
||||||||
Standards |
MIL-STD-810F, IEC68-2-27 |
Send product request
Other supplier products
Pneumatic Bump Test Equipment | KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electroni... | |
Dual-environment constant acceleration tester | KRD32 series non-standard centrifugal constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal... | |
Packaging Compression Test Machine | KRD101 Series Packaging Compression Tester is designed to evaluate the compressive strength of packaging in order to prevent the product from defor... | |
High Reliability Pneumatic Vertical Shock/Bump Test Machine | KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operatio... | |
KRD11 Pneumatic Vertical Shock/Bump Test System | KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operatio... |
Same products
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... | |
Hast Pct High-Low Temperature Test Chamber with Pressure | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali... | |
Programmable Hast Accelerated Aging Tester for Industry | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ... | |
CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard | Seller: AI SI LI (China) Test Equipment Co., Ltd. | CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th... | |
Package Large Scale Simulation Transportation Vibration Tester | Seller: AI SI LI (China) Test Equipment Co., Ltd. | This machine is used to simulation testing damage between transport for various package stuff, PC... |