Pneumatic Horizontal Shock Test Machine
The KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the reliability and structural integrity of the test unit in a horizontal impact environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, or square wave shock test to realize the shock energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure.
l Windows-based stable control system, full-automatic remote-control interface
l Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
l Trapezoidal guide posts: large supporting force, good lubricity and full-automatic positioning table.
l Automatic control of shock speed: the shock overload value is achieved by adjusting the air pressure. After the cylinder pressure is set, system will automatically control the shock speed with high accuracy and good repeatability.
l Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
l The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator.
l Multiple waveforms: can perform conventional half-sine waves, post-peak sawtooth waves, or square waves.
l Easy installation: the device comes with a base, due to short driving stroke of the pneumatic cylinder, the footprint is small.
l Integrated control & measurement system: the system comes with a variety of waveform tolerance bands that comply with the MIL-810 standard, automatically generates test reports after the test is completed.
l System scalability: the system can be designed as a bidirectional shock according to user needs, saving test time more effectively.
Technical Specifications
|
Model Parameters |
KRD12-10 |
KRD12－50 |
KRD12－100 |
KRD12－200 |
KRD12－500 |
KRD12－1000 |
KRD12－2000 |
KRD12－3000 |
||
|
Rated Load (kg) |
10 |
50 |
100 |
200 |
500 |
1000 |
2000 |
3000 |
||
|
Table Size (mm) |
200×200 |
500×500 |
600×600 |
800×800 |
1000×1000 |
1200×1200 |
1500×1500 |
2000×2000 |
||
|
Peak Acc. (g) |
Half-Sine |
10-5k |
10～1.5k |
10～1k |
10-800 |
10-600 |
10-500 |
10-200 |
10-150 |
|
|
Post-Peak Sawtooth |
10～200 |
10~100 |
10~50 |
|||||||
|
Trapezoid |
/ |
15～200 |
15～200 |
15-100 |
15-60 |
15-60 |
15-50 |
30-50 |
||
|
Pulse Duration (ms) |
Half-Sine |
1~60 |
|
2～60 |
|
3～60 |
6～60 |
8～60 |
||
|
Post-Peak Sawtooth |
3~18 |
6~18 |
||||||||
|
Trapezoid |
/ |
3~18 |
6~18 |
|||||||
|
Bump Waveform |
Half sine wave |
|||||||||
|
Bump Peak Acceleration （g） |
4-150 |
5-100 |
||||||||
|
Bump Pulse Duration (ms) |
2-30 |
3-30 |
||||||||
|
Bump Rate (Times/Min) |
10-120 |
|||||||||
|
Overall Dimension (mm) |
3000×1150×850 |
3300×1150×850 |
3500×1200×850 |
3800×1300×850 |
4000×1450×850 |
4500×1650×850 |
5500×2000×850 |
6000×2200×850 |
||
|
Weight (kg) |
2000 |
2500 |
3000 |
4000 |
4500 |
5000 |
6000 |
7500 |
||
|
Installation Condition |
Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
||||||||
|
Power |
AC220V±10%, 50Hz |
|||||||||
|
Air source |
≤1MPa |
|||||||||
|
Floor |
Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment |
|||||||||
|
Standard |
MIL-STD-810F IEC68-2-27 |
|||||||||
Send product request
Other supplier products
 |
Electro-Dynamic Shakers Vibration Tester | KRD01 series is an air-cooled electric vibration test system, with advantages of wide frequency, excellent performance, high reliability, small foo... |
 |
Constant Acceleration Tester (Arm Type) | KRD31 series constant acceleration tester are used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-... |
 |
Pneumatic Vertical Shock Response Spectrum Test Machine | KRD14 series pendulum shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or... |
 |
KRD51 Transportation Bounce Test System | Bounce testing simulates the constant loose cargo state during truck transport. Often times, containers carrying military and civilian hardware (su... |
 |
KRD61 6-DOF Simulation Table | KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges c... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
