Pneumatic Vertical Shock Response Spectrum Test Machine
KRD14 series pendulum shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of the test product in a shock environment. The shock response spectrum is the total result of a series of single-degree-of-freedom linear systems with different natural frequencies subjected to the same shock excitation response. When a product is subjected to an impact, the maximum value of its impact response means that the product has a maximum stress. Therefore, the shock response spectrum tester can better simulate the shock wave and shock energy suffered in the real environment.
l 1200mm table size withstand 1000kg load.
l Windows-based stable control system, full-automatic remote-control interface.
l The control & measurement system has built-in SRS specifications and tolerances, which is convenient for users to adjust and apply. It automatically completes the test and generates reports.
l Adjust the driving shock energy by adjusting the air pressure, which is convenient to operate and high in efficiency.
l The equipment takes up a small area and is easy to install.
Technical Specifications
|
Model Parameters |
KRD14－20 |
KRD14－50 |
KRD14－100 |
KRD14－200 |
KRD14－500 |
KRD14－1000 |
|
Load (kg) |
20 |
50 |
100 |
200 |
500 |
1000 |
|
Table Size(mm) |
300×300 |
500×500 |
600×600 |
800×800 |
1000×1000 |
1200×1200 |
|
Response Frequency Range (Hz) |
10～10000 |
|||||
|
Acceleration (g) |
100000 |
60000 |
50000 |
30000 |
20000 |
10000 |
|
Gradient of Rising Stage (dB/Otc) |
6～9 |
|||||
|
Tolerance Range (dB) |
±6～9 |
|||||
|
Overall Dimension (mm) |
1300×850×1500 |
1400×1000×1500 |
1500×1100×1600 |
1700×1200×1700 |
1900×1300×1800 |
2200×1500×2000 |
|
Power |
AC220V ± 10%，50Hz |
|||||
|
Weight (kg) |
2000 |
2500 |
3000 |
3500 |
4000 |
5000 |
|
Working Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
|||||
Send product request
Other supplier products
 |
KRD32 Non-standard Constant Acceleration Tester | KRD32 series non-standard constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dua... |
 |
KRD10 Hydraulic Vertical Shock Test System | KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to eva... |
 |
KRD60 3-DOF Simulation Table | KRD60 Series 3 DOF simulation table simulates various mechanical, electrical, and electronic products installed on ships, seaplanes, and other equi... |
 |
KRD50 Transportation Simulation Test System | KRD50 series transportation simulation test system is to simulate the actual road conditions such as shocks and vibrations during the transportatio... |
 |
Pneumatic Bidirectional Vertical Shock Testing Machine | KRD17 series pneumatic bidirectional vertical shock test system is the new designed and developed for some large specimens that cannot or are not e... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
