High Acceleration Shock Test Machine
KRD13 series high acceleration shock test system is specially designed to meet the requirements of military industry and home appliances. The system adopts the principle of pneumatic energy storage expansion. By adjusting the inflation pressure, various high-level acceleration tests can be easily implemented in a short stroke.
For the classic drop test, it’s equipped with the corresponding shock amplifier to complete drop test.
l Windows-based stable control system, full-automatic remote-control interface
l Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
l Automatic control of lifting height with high accuracy and good repeatability
l Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
l The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator.
l Easy installation: the device comes with a base, due to short driving stroke of the pneumatic cylinder, the footprint is small.
Technical Specifications
|
Model Parameters |
KRD13－50 |
KRD13－100 |
KRD13－200 |
KRD13－500 |
KRD13－800 |
KRD13－1000 |
KRD13-2000 |
||
|
Rated Load (kg) |
50 |
100 |
200 |
500 |
800 |
1000 |
2000 |
||
|
Table Size (mm) |
500×500 |
600×600 |
800×800 |
1000×1000 |
1200×1200 |
1500×1500 |
2000×2000 |
||
|
Peak Acc. (G) |
Half-Sine |
10~1500 |
10-1000 |
10-500 |
10-400 |
10-300 |
10-200 |
||
|
Post-Peak Sawtooth |
10~200 |
10~100 |
10-50 |
||||||
|
Trapezoid |
15-200 |
15-200 |
15-100 |
15-100 |
15-60 |
15-50 |
30-50 |
||
|
Pulse Duration (ms) |
Half-Sine |
2～60 |
2～60 |
3～60 |
4～60 |
5～60 |
6～60 |
8～60 |
|
|
Post-Peak Sawtooth |
3～18 |
6～18 |
|||||||
|
Trapezoid |
3～18 |
6～18 |
|||||||
|
Bump Waveform |
Half Sine Waveform |
||||||||
|
Shock Peak Acceleration (g) |
5～100 |
||||||||
|
Shock Pulse Duration(ms) |
3～30 |
||||||||
|
Bump Rate (Times/Min) |
10-120 |
||||||||
|
Overall Dimension (mm) |
1200×1200×1500 |
1200×1200×1500 |
1200×1200×1500 |
1300×1300×1600 |
1500×1500×1700 |
1600×1600×1800 |
2000×2000×1900 |
||
|
Weight (kg) |
3000 |
3200 |
3400 |
4000 |
5000 |
6000 |
8000 |
||
|
Installation Condition |
Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
|||||||
|
Power |
AC220V±10%, 50Hz |
||||||||
|
Air source |
≤1MPa |
||||||||
|
Floor |
Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment |
||||||||
|
Standards |
MIL-STD-810F IEC68-2-27 |
||||||||
Send product request
Other supplier products
 |
Pneumatic Vertical Shock Response Spectrum Test Machine | KRD14 series pendulum shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or... |
 |
6-DOF(degree of freedom) Simulation Test Machine | KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges c... |
 |
Packaging Compression Test Machine | KRD101 Series Packaging Compression Tester is designed to evaluate the compressive strength of packaging in order to prevent the product from defor... |
 |
KRD40 Drop Test System | KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and uni... |
 |
Small Drop Test Equipment | KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile s, walkie-talkies, elec... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
