Pneumatic Horizontal Shock Response Spectrum Test Machine
KRD15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy to provide impact energy, push the shock hammer to impact the resonance plate, and generate high energy shock. Comparing to traditional pendulum shock response spectrum tester, this machine has the advantages of high energy, stable performance, high reliability, good repeatability, easy adjustment, safety and environmental protection. It is mainly applied in the industries of aerospace, aviation and ships.
l The system uses pneumatic energy storage to drive the impact hammer, with large driving force, fast response speed and reliable structure;
l Adjust the driving shock energy by adjusting the air pressure, which is convenient to operate and high in efficiency.
l Special designed base for the response spectrum, which can raise the installation position of the response board, convenient for the user to install the test piece and adjust the gasket. In addition, the rigidity of the installation position of the response board is greatly enhanced, which makes it better fixed to the ground foundation and withstands larger Impact load.
l A two-level safety cut-out is designed to fully protect the safety of operators.
l The operating software has the functions of shock response spectrum tester control, shock data collection, and response spectrum analysis.
Technical Specifications
|
Model Parameters |
KRD15－50 |
KRD15－100 |
KRD15－200 |
KRD15－500 |
KRD15－1000 |
|
Load (kg) |
50 |
100 |
200 |
500 |
1000 |
|
Table Size (mm) |
500×500 |
600×600 |
800×800 |
1000×1000 |
1200×1200 |
|
Response Frequency Range (Hz) |
10-10000 |
||||
|
Acceleration (g) |
15000 |
12000 |
10000 |
8000 |
6000 |
|
Gradient of Rising Stage (dB/Otc) |
6～9 |
||||
|
Tolerance Range (±Db) |
6～9 |
||||
|
Overall Dimension (mm) |
3700×1200×850 |
4000×1200×850 |
4300×1440×850 |
4500×1640×850 |
4700×1840×850 |
|
Power |
AC220V ± 10%，50Hz |
||||
|
Weight (kg) |
3000 |
3500 |
3600 |
3800 |
4000 |
|
Working Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80% (25℃), non-condense |
||||
Send product request
Other supplier products
 |
3-DOF Simulation Test Machine | KRD60 Series 3 DOF simulation table simulates various mechanical, electrical, and electronic products installed on ships, seaplanes, and other equi... |
 |
KRD12 Pneumatic Horizontal Shock Test System | The KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the r... |
 |
KRD30 Constant Acceleration Tester (Box Type) | KRD30 series constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are sub... |
 |
KRD61 6-DOF Simulation Table | KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges c... |
 |
KRD15 Pneumatic Horizontal Shock Response Spectrum Test System | KRD15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy to provide impact energy, push the shock hamm... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
