Fast temperature change test chamber
The working principle of the rapid temperature change test chamber is to simulate external environmental changes through physical cooling and heating methods, creating extreme environmental temperatures, in order to test the extreme environmental adaptability of the product and ensure stronger weather resistance in subsequent use. The rapid temperature change test chamber is mainly composed of the test chamber, refrigeration system, heating system, gas circulation system and control system. The refrigeration system cools the test chamber, the heating system heats the test chamber, and the gas circulation system makes the air in the test chamber circulate to prevent frost formation on the surface and inside of the product. The rapid temperature change test is mainly conducted in the rapid temperature change test chamber. When the environmental temperature in the rapid temperature change test chamber rises, due to thermal inertia, the surface temperature of the product is lower than the environmental temperature. When the humid and hot environmental air encounters the product surface that is lower than the dew point, water vapor will condense on the product surface to form dew drops. Moreover, if the product is sealed, when the environmental temperature in the rapid temperature change test chamber drops, the inner wall temperature of the product shell drops faster than the air temperature in the chamber, and the humid and hot air in the chamber will also condense into dew drops on the inner wall of the product shell. If the inner wall temperature of the product shell is too low, condensation will also form frost. Dew and frost are fatal to the product; they can reduce the product's lifespan or even damage the product. Therefore, it is necessary to avoid dew and frost formation during the temperature rise and drop process of the product.If you need more information about the models of our testing equipment. Please contact me.
Send product request
Other supplier products
 |
Aircraft material simulation temperature, humidity and low-pressure test chamber | The low-pressure test chamber can simulate various low-pressure conditions ranging from sea level to high altitudes by controlling the pressure ins... |
 |
Satellite components Walk-In Altitude Test Chamber | Designed to simulate and evaluate the reliability of electrical/electronic products, instruments, and industrial equipment under combined environme... |
|
|
Fast temperature change test chamber | The working principle of the rapid temperature change test chamber is to simulate external environmental changes through physical cooling and heati... |
 |
Walk In Salt Spray Chamber (Temperature Humidity Combine Salt Spray) | Walking in a salt spray chamber is different from a basic salt spray laboratory. Walking in a salt spray chamber exposes the samples to a series of... |
 |
High Low Test Temperature Humidity Chamber | Applicationtemperature humidity chamberis used to simulate the combination of temperature and humidity of the product in a climatic environment (hi... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
