Wet leakage current test system of photovoltaic module
Standard
IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
UL 61730: Safety Standard for Photovoltaic Modules
ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories
CE Certification(Conformité Européenne)
Product Advantages
IEC 61215 Compliance
22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.
<3.500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.
Multi-Directional Spray Simulation
360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.
Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.
Corrosion-Resistant Design
15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.
316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.
Safety First
Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.
Door Interlock System: Halts testing if enclosure is opened during wet cycles.
Smart Data Acquisition
16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.
AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.
Product Features
Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.
7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.
Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.
Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.
Modular Design: Expandable from single-module to 10-module parallel testing.
Accessories Included
Testing Kit:
4x PV module test fixtures (adjustable for frameless/framed modules).
10x insulated test leads with alligator clips.
Software Suite:
License key forLeakTest Pro(Windows/Linux).
1-year free access to cloud-based I-V curve analyzer.
Calibration & Safety:
NIST-traceable conductivity meter.
Emergency eyewash station (wall-mounted).
Maintenance Kit:
Spare acrylic tank seal and nozzle gaskets.
Tank cleaning solution (non-corrosive).
Documentation:
Multilingual quick-start guide (printed + digital).
Compliance certificates for IEC/UL/ISO standards.
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Tank Dimensions | 2.100mm (W) × 1.000mm (D) × 250mm (H) |
| Tank Material | 15mm Cast Acrylic (Plexiglass) |
| Temperature Range | 15°C to 40°C (operational) |
| Temperature Stability | ±0.5°C (at 22°C setpoint) |
| Liquid Resistivity | <3.500 Ω·cm (deionized water recommended) |
| Spray Pressure | 0–10 bar (adjustable) |
| Flow Rate | 0–15 L/min (per nozzle) |
| Power Supply | 230V AC, 50/60Hz (single-phase) |
| Dimensions | 2.500mm (W) × 1.200mm (D) × 1.500mm (H) |
| Weight | 350 kg (net) / 450 kg (gross) |
Send product request
Other supplier products
 |
Rapid Crack Propagation Tester | Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid... |
 |
Catheter Burst Pressure Tester | The Catheter Burst Pressure Tester uses the positive pressure method and is designed according to the relevant clauses of Appendix F of YY0285.1-20... |
 |
UV curing light box | Standard ISO 10977: Adheres to industrial standards for UV curing of adhesives and coatings. ASTM E3022: Meets requirements for radiometric measu... |
 |
Surface Flammability Tester | Standards 1. GB/T 8745-2001《textile Combustion performance fabric surface burning time measurement》 2. ISO 10047:1993《textile fabric surface burn... |
 |
Adiabatic Self - Accelerating Decomposition Temperature Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
