.

Wet leakage current test system of photovoltaic module

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

UL 61730: Safety Standard for Photovoltaic Modules

ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories

CE Certification(Conformité Européenne)

Product Advantages

IEC 61215 Compliance

22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.

<3.500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.

Multi-Directional Spray Simulation

360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.

Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.

Corrosion-Resistant Design

15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.

316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.

Safety First

Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.

Door Interlock System: Halts testing if enclosure is opened during wet cycles.

Smart Data Acquisition

16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.

AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.

Product Features

Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.

7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.

Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.

Modular Design: Expandable from single-module to 10-module parallel testing.

Accessories Included

Testing Kit:

4x PV module test fixtures (adjustable for frameless/framed modules).

10x insulated test leads with alligator clips.

Software Suite:

License key forLeakTest Pro(Windows/Linux).

1-year free access to cloud-based I-V curve analyzer.

Calibration & Safety:

NIST-traceable conductivity meter.

Emergency eyewash station (wall-mounted).

Maintenance Kit:

Spare acrylic tank seal and nozzle gaskets.

Tank cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

ParameterSpecification
Test Tank Dimensions 2.100mm (W) × 1.000mm (D) × 250mm (H)
Tank Material 15mm Cast Acrylic (Plexiglass)
Temperature Range 15°C to 40°C (operational)
Temperature Stability ±0.5°C (at 22°C setpoint)
Liquid Resistivity <3.500 Ω·cm (deionized water recommended)
Spray Pressure 0–10 bar (adjustable)
Flow Rate 0–15 L/min (per nozzle)
Power Supply 230V AC, 50/60Hz (single-phase)
Dimensions 2.500mm (W) × 1.200mm (D) × 1.500mm (H)
Weight 350 kg (net) / 450 kg (gross)


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Fiber Crimp Elasticity meter
Fiber Crimp Elasticity meter Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber. Crimp elasticity, crimp recovery rate index...
Qinsun SUNTEST CPS+
Qinsun SUNTEST CPS+ A practical desktop xenon lamp equipment with various accessories, customized to meet your SUNTEST needs. Here, you can see SunCool cooling devic...
 Solids Spontaneously Igniting Tester
Solids Spontaneously Igniting Tester Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.3.1.4 Test N.2: Test ...
Large diameter blasting test machine
Large diameter blasting test machine Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable...
Heat Storage Performance Tester
Heat Storage Performance Tester Heat Storage Performance Tester provides standardized procedures and controls radiation heat conditions, providing repetitive measurement for heat ...
供应产品

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
Xenon Test Chamber
Xenon Test Chamber 卖方: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester 卖方: 上海千实精密仪器 Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester 卖方: 上海千实精密仪器 Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester 卖方: 上海千实精密仪器 Product details Furniture flammability tester is mainly used to test the combustion performance ...