Rubber Sleeve Rebound Tester
Product introduction
The collection needle rubber sleeve resilience tester evaluates the force measured by the collection tube when it passes vertically through a die hole larger than 0.05 mm outside diameter of the collection needle tube under test.
Meet the standard
YYT1618-2018
DIN 53 512
ISO 4662
ASTM D7121
Operation method
1. Insert the needle at the butt end into the die hole of the clamping fixture 2mm above
the surface.
2. Start the test device to compress the rubber sleeve.
3. Measure the rubber sleeve resilience at 5mm and 15mm between the needle tube and
the needle base.
4. The test result is 0.5N≤ the rubber sleeve resilience ≤1.5N.
Technical parameter
1. Pressure test range: 0 — 50N, error is not more than ±1%, resolution 0.01N.
2. Test time: 1-999S, any choice, the error is not more than ±0.5S.
3. Test speed: 50mm/min, 80mm/min, 100mm/min error is not more than ±2%.
4. Printing method: Each time can print 8. 10 test data or 13 test data and the average
piercing force and deviation value.
5. Measuring distance: 0 — 50mm, error is not more than ±0.1mm.
Send product request
Other supplier products
 |
Fabric light transmittance test machine | Light transmittance test machine for fabric is used to determine the total visible light transmittance of the fabric to evaluate the shading proper... |
 |
Paper absorbance tester | Product Introduction: It is an instrument used to determine the surface water absorption of coated paper and cardboard, including corrugated board... |
 |
Medical injection needle rigidity tester | Standard GB 18457-2001 This standard mandates precise control over needle wall thickness (normal, thin, ultra-thin) and rigidity performance, dir... |
 |
Thermal Radiation Performance Tester(RPP) | IntroductionThermal protective clothing and some fire-retardant properties of the material refers that human body carry out security protection who... |
 |
Helmet Xenon Aging Tester | Standards GB/T2014-9-19. ISO 4892 ASTM G151. G154. D4329 d4587、d4799、sae j2020 Xenon lamp aging test box structure 1. the box is molded by C... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
