Mechanical load testing machine for photovoltaic modules

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules

UL 1703: Flat-Plate Photovoltaic Modules and Panels

CE Certification(Conformité Européenne)

Product Advantages

Multi-Standard Compliance

5.400 Pa Forward / 2.400 Pa Reverse Loading: Replicates snow/wind loads per IEC 62782.

1.000 Pa Dynamic Testing: 1.000-cycle fatigue simulation for hail/debris impact.

Ultra-Precise Control

0.1N Force Feedback: Low-friction cylinder ensures ±5% pressure accuracy.

7+3s Cycle Timing: Mimics real-world pulsating wind loads.

Automated Testing

Programmable Cycle Count: 1–99.999 cycles with auto-stop at failure.

AI-Powered Failure Detection: Real-time EL imaging correlation for crack analysis.

Safety First

Emergency Shutoff: Dual redundant safety circuits with load cell override.

Overload Protection: 6.000 Pa max pressure cutoff.

Modular Design

Quick-Change Fixtures: Adapts to framed, frameless, and flexible PV modules.

Expandable Test Area: Up to 3.0m × 2.0m for large-format modules.

Product Features

Dual-Mode Operation: Static/dynamic load testing with auto-switching.

10” Touchscreen HMI: Preloaded IEC/UL test sequences with customizable pressure profiles.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for failures.

Self-Calibrating System: Auto-tare and linearity checks before each test.

Rust-Resistant Frame:304 stainless steel construction with epoxy coating.

Accessories Included

Testing Kit:

4x PV module clamping fixtures (adjustable for 16–40 mm frames).

10x load distribution pads (anti-skid rubber).

Software Suite:

License key forLoadTest Pro(Windows/Linux).

1-year free access to cloud-based fatigue analysis tools.

Calibration & Safety:

NIST-traceable pressure gauge.

Safety harness kit for large modules.

Maintenance Kit:

Spare O-rings and cylinder seals.

Machine cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

Parameter	Specification
Test Area	2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load	5.400 Pa (adjustable)
Reverse Load	2.400 Pa (adjustable)
Dynamic Load	1.000 Pa, 1.000 cycles (7s+3s timing)
Pressure Accuracy	±5% of setpoint
Force Sensor	0.1N resolution, 10 kN capacity
Power Supply	230V AC, 50/60Hz (single-phase)
Air Supply	6–8 bar (clean/dry air required)
Weight	1.200 kg (net) / 1.500 kg (gross)

Other supplier products

	High-precision Material Thermal Conductivity Tester	Introduction It adopts the internationally popular method of heat flow meter to detect thermal conductivity and thermal resistance, and realizes...
	Molten Metal Penetration Resistance Test device	Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra...
	STD IPX7 Machine Waterproof Test Chamber	Product Introduction Test the product waterproof performance in the soaking environment (water depth 1 meters). Through the test ,check whether t...
	Contact Lens Oxygen Permeability Analyzer	Product Introduction: Contact lens oxygen permeability measuring instrument (polarography) is designed for soft and hard contact lenses (contact l...
	Textile Point-to-Point Resistivity Tester	Product Performance It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "Sp...

All supplier products

Same products

	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Seller: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...