Carpet Dynamic Load Tester
Compliance Standards
ISO 2094: 1999 (BS)
QB/T 1091-2001
ASTM D3574 TEST I4
Instrument Features
Provide information on the reduction in the thickness of carpet pile Imitate the pressure and shearing effects generated by walking Adopt British and international standard testing methods
Product Details
This instrument is also known as a dynamic load machine. It provides information on the reduction in the thickness of carpet pile by imitating the shearing effects of two actions: the pressure during walking and that from the edges of shoes.
Testing Method
The load has two rectangular steel feet with dimensions of 51 mm×6.3 mm and a height of 9.5 mm. The load is lifted by a cam through a cantilever mounted on a pivot and is made to perform a free - fall motion at a controllable height above the carpet sample every five seconds. The steel plate holding the sample moves slowly and continuously back and forth so that the metal plate moves 3.2 mm each time the load falls. There is a semi - overlapping area for each impact. Twenty - five impacts form a complete back - and - forth movement, creating a stressed area that is 90 mm long and 50 mm wide.
Technical Parameters
Dimensions: W500 mm, D500 mm, H370 mm Power Consumption: 250 W
Send product request
Other supplier products
 |
Metal wire winding testing machine | According to the criteria: GB/T 2976 "Wire winding test method for Metal Materials" ISO 4101 Cold drawn steel wire for elevator wire ropes - Tech... |
 |
Micro Rapid Closed Cup Flash Point Tester(Pensky Martens) | Reference Standards： SN/T 3077.1、SN/T 3077.2. SH/T 0768. DL/T 1354. ASTM D93、ASTM D6450、ASTM D3828、ASTM D7094、ASTM D7236、ASTM D56、ASTM D56、ASTM... |
 |
Scott rolling tester | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials. One end o... |
 |
Electrochemical Corrosion and Wear Testing Machine | Standard ASTM G119: A standard for evaluating synergistic corrosion-wear performance, particularly for biomedical implants in simulated body f... |
 |
Needle Flame Tester | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
