High Velocity Impact Tester
Main Purpose
To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.
Applicable Standards
SNELL SA/K2010
EN 166. EN 168
ANSI Z87.1. MIL - PRF - 32432
ISO 4855
Technical Parameters
1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm
2. impact speed: 140~170m/s (adjustable);
3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);
4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;
5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;
6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;
7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;
8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.
Send product request
Other supplier products
 |
Battery Nail Penetration Tester | Description The test shall be carried out at an ambient temperature of 20°C±5°C. Place the battery with a thermocouple (the contact... |
 |
Fiber Blend Ratio Tester | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
 |
Motor Accessories Combustion Testing Machine | Introduction: This machine is designed according to ISO3795 standards and relevant clauses. Apply to identify vehicles (cars, multipurpose passeng... |
 |
Adhesion Tester | The tack - holding tester, also known as the tack - holding property tester, tack - holding force tester, or holding - power tester, is a device sp... |
 |
Liquid Spontaneous ignition point test device | Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temperature of Liquid Chemicals” and ASTM E “Tes... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
