.

Dental Implants Fatigue Tester

Standard

ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure criteria.

YY/T 0521-2018 (China): Defines methodologies for evaluating the fatigue strength of dental implant-abutment complexes under cyclic loading.

Product Advantages

Electromagnetic Precision: Novel servo motor technology ensures backlash-free operation with 0.001 mm displacement resolution.

Biorelevant Simulation: Integrated 37°C water bath system replicates physiological conditions for in vitro corrosion testing.

Universal Fixturing: Adjustable angle clamps accommodate straight/angulated implants (0°–25° pre-set options).

High-Frequency Stability: 20 Hz operation with ±0.05% load accuracy across 2 million cycle tests.

Compact Design: Benchtop footprint (450 × 400 × 600 mm) suits laboratory environments.

Regulatory Compliance: Pre-loaded ISO 14801 protocols with automated data reporting for FDA/CE submissions.

Product Features

Electromagnetic Servo Actuator: 600 N dynamic load capacity with programmable R=0.1–10 ratios.

Dual Sensor System: 0.01 N resolution load cell + 0.001 mm LVDT displacement transducer.

Dynamic Load Control: 0.1–20 Hz frequency range with sine/square/random waveforms.

Thermal-Mechanical Bath: 37±0.5°C recirculating water system with anti-evaporation design.

High-Resolution Imaging: Built-in 2MP camera system for fretting corrosion analysis.

Safety Suite: Emergency stop, overload clutches, and water leak detection system.

Technical Parameters

ParameterSpecification
Max. Dynamic Load ±600 N (0.01 N resolution)
Frequency Range 0.1–20 Hz (0.01 Hz increments)
Load Ratio (R) 0.1–10 (adjustable)
Displacement Range ±5 mm (0.001 mm resolution)
Water Bath Temperature 37±0.5°C (PT1000 sensor)
Data Sampling Rate 10 kHz (synchronized across 8 channels)
Power Requirements 220V/110V ±10%, 50/60Hz, 1.200W
Dimensions (W×D×H) 450 × 400 × 600 mm
Weight 55 kg (net) / 65 kg (with water bath)
Noise Level <55 dB (A-weighted)

Accessories

Dental Implant Fixture Kit:

Adjustable angle clamps (0°–25° pre-set options)

Self-centering abutment adapters (3.0–6.5 mm compatibility)

Thermal-Mechanical Bath:

10L capacity with recirculating pump

Corrosion-resistant titanium interior

FatigueMaster Pro Software:

Automated S-N curve generation and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.1–10 Nm)

Implant alignment jigs (ISO 14801 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

LVDT verification tool

Safety Kit:

Water leak detection system

Acoustic enclosure with 25 dB noise reduction


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Geosynthetic acid and alkali aging tester
Geosynthetic acid and alkali aging tester Scope of application: Test method for acid-resistant lye properties of various geosynthetic materials; The machine has stirring function, the solu...
Thermal Protective Performance Tester (TPP)
Thermal Protective Performance Tester (TPP) The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through...
Cantilever Fabric Stiffness Tester
Cantilever Fabric Stiffness Tester Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, flexural rigidity and bending modulus of fabrics. ...
Rain Tester
Rain Tester Standard AATCC 35: Water Resistance: Rain Test for Fabrics BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration &...
Metallic Cables and Wire Ropes Mechanical Property Testing Machine
Metallic Cables and Wire Ropes Mechanical Property Testing Machine Standard YY/T 0812-2010 (China): Specifies mechanical testing protocols for metal cables/cables used in fracture fixation, including fatigue stren...
All supplier products

Same products

Custom Stainless Components for OEM Applications
Custom Stainless Components for OEM Applications Seller: Yongjia County Yaokang Technology Co., Ltd. Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Seller: Kelilong Electron Co.,Ltd Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Seller: Standard International Group (HK) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...