Fire retardant coatings tester tunnel method
Product Introduction:
The fire retardant coating flame propagation tester is suitable for testing the flame propagation characteristics of the fire retardant coating on the surface of the substrate under laboratory conditions, and evaluating the protection effect of the fire retardant coating on the substrate and its flame propagation performance.
Working conditions:
Ambient temperature :5——35℃
Relative humidity: not more than 85%
Working environment: indoor without forced ventilation
Power supply :AC200——240V, 50HZ
Technical parameters:
Burner top diameter :20mm, height about 200mm
Burner blue flame temperature :(900±20) "C
Combustible gas source: natural gas, liquefied petroleum gas or city gas
Thermocouple: armored thermocouple with precision of work grade, K division and outer diameter not greater than 3mm
Electronic potentiometer: The error is less than ±0.5% of the measured temperature
High voltage electronic ignition system
Send product request
Other supplier products
 |
Building material products single combustion tester | Meet the standard: Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer C... |
 |
Building Material Smoke Toxicity Tester | Introduction： Building Material Smoke Toxicity Test Equipment plays a critical role in assessing the safety of construction materials. In the even... |
 |
Curtain Combustion Tester | The curtain combustion tester is a special equipment for testing the combustion characteristics of fabrics such as curtains. Working principle: A... |
 |
Blankets Flammability Tester | Introduction The test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surfa... |
 |
Thermal Radiation Flooring Combustion Tester | Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings usi... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
