.

409 409L Hot Rolled Stainless Steel Coils

Huaxiao Capacity about409 409LHot rolled stainless steel coil, 409 409L HRC

Thickness: 1.2mm - 16mm

Width: 600mm - 2000mm, the narrowed products pls check in strip products

Max coil weight: 40MT

Coil ID: 508mm,610mm

Finish: NO.1, 1D, 2D, #1, hot rolled finished, black, Anneal and pickling, mill finish

409 Similar grade from different country standard

1.4512 S40930 0Cr11Ti

409 Chemical Component:

C: ≤0.08, Si: ≤1.0, Mn: ≤1.0, S: ≤0.03, P: ≤0.045, Cr: 10.5~11.7, Ni: 0.5 Max, Ti: 6xC – 0.75

409 Mechanical Property:

Tensile strength: > 380 Mpa
Yield Strength: >205 Mpa
Elongation(%): > 20%
Hardness: < HRB88
Bending Angle: 180 degree

409L Same grade from different country standard
SUH409L S40903 00Cr11Ti 022Cr11Ti

409L Chemical Component :
C: ≤0.03, Si: ≤1.0, Mn: ≤1.0, S: ≤0.03, P: ≤0.045, Cr: 10.5~11.7, Ni: 0.5 Max, Ti: 6xC – 0.75

409L Mechanical Property :
Tensile strength: > 380 Mpa
Yield Strength: >205 Mpa
Elongation(%): > 20%
Hardness: < HRB88
Bending Angle: 180 degree

Features about 409 409L stainless steel
Corrosion resistance, heat resistance, welding performance well, low cost compare to 304 316L
409 409L Stainless steel coil rolled coil Application
409L stainless steel with excellent corrosion resistance, suitable for extending the life of vehicles and car lightweight, and as recycling of environmentally friendly materials, GM, Ford, Volkswagen, DaimlerChrysler and other major automobile manufacturers in the exhaust system 100% stainless steel. Car exhaust system will be produced by the car engine high temperature, high-speed combustion exhaust gas treatment, it is discharged from the car outside. The main function of the exhaust system is to reduce vibration and noise, and after the exhaust gas is burned, it is converted to a clean gas. Automotive exhaust systems are the longest component of automotive components that withstand extreme temperature changes (-20 to 850 ° C) and high-frequency, high-velocity, high-frequency exhaust gas vibrations that are the most variable and most in-vehicle 409L can withstand the temperature limit (-20 ~ 650℃). Recently, due to increasingly stringent vehicle exhaust standards for the environment, increased driving in short-distance urban areas, and the spread of winter snow-removing agents, the use standards of exhaust systems have also become more and more stringent. Conventional steel cannot meet its requirements from the EuropeanⅡ-EuroⅣstandard Technical requirements, high-end motorcycle exhaust system has been used the 409L material. 409L stainless steel for each vehicle is 35KGS-65KGS.



Send product request

To: Huaxiao Metal Corporation Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

304 304L Cold Rolled Stainless Steel Coils(0.2mm - 8mm)
304 304L Cold Rolled Stainless Steel Coils(0.2mm - 8mm) Huaxiao Capacity about 304/304L cold rolled stainless steel coil, 304/340L CRC Thickness: 0.2mm - 8.0mm Width: 600mm - 2000mm, the narrowed produ...
BA Stainless Steel Coil
BA Stainless Steel Coil Huaxiao Capacity about BA stainless steel coil, Bright Annealing stainless steel coil Finish: BA, Bright Annealing Film: PVC,PE, PI, Laser PVC, 2...
2205 Hot Duplex Stainless Steel Plate
2205 Hot Duplex Stainless Steel Plate Huaxiao Capacity about2205 hot rolled stainless steel plate- duplex stainless steel plate, 2205 PMPThickness: 1.2mm - 200mmWidth: 600mm - 3200mm, t...
409 409L Hot Rolled Stainless Steel Coils
409 409L Hot Rolled Stainless Steel Coils Huaxiao Capacity about409 409LHot rolled stainless steel coil, 409 409L HRC Thickness: 1.2mm - 16mm Width: 600mm - 2000mm, the narrowed products ...
430 Cold Rolled Stainless Steel Coils(0.2mm-8mm)
430 Cold Rolled Stainless Steel Coils(0.2mm-8mm) Huaxiao Capacity about 430 cold rolled stainless steel coil, 430 CRC Thickness: 0.2mm - 8.0mm Width: 600mm - 2000mm, the narrowed products pls c...
All supplier products

Same products

Iron Casting Parts GG20 Cast Iron Gearwheel For Concrete Mixer Machines
Iron Casting Parts GG20 Cast Iron Gearwheel For Concrete Mixer Machines Seller: TwinkleIndustrial Grey Iron Casting Gearwheel · GG20/HT200/FC200/No. 30 · Sand Casting Production Tec...
6000 series deep groove ball bearings
6000 series deep groove ball bearings Seller: Ningbo Yuhong Bearing Co., Ltd The 6000 series deep groove ball bearings includes various sizes and configurations. These bearin...
Aluminum discs for cookware 1050 1060 3003 Aluminum discs for non-stick pans wholesale
Aluminum discs for cookware 1050 1060 3003 Aluminum discs for non-stick pans wholesale Seller: Henan Hongchang Aluminum Co., Ltd. The lightness and excellent thermal conductivity of aluminum alloy make it a high-quality materia...
Molybdenum Tube
Molybdenum Tube Seller: Beijing Huasheng Metal Materials Co., Ltd Molybdenum tubehas high melting point, high strength, good thermal conductivity, high temperature...
Ferro Tungsten
Ferro Tungsten Seller: Beijing Huasheng Metal Materials Co., Ltd HSG METAL, as one of ferro tungsten suppliers, provides ferro tungsten for sale. Ferrotungsten...