BA Stainless Steel Coil
Huaxiao Capacity about BA stainless steel coil, Bright Annealing stainless steel coil
Finish: BA, Bright Annealing
Film: PVC,PE, PI, Laser PVC, 20um-120um, paper interleaved
Thickness: 0.3mm - 3.0mm
Width: 600mm - 1500mm, the narrowed products pls check in strip products
Max coil weight: 10MT
Coil ID: 400mm, 508mm, 610mm
Grade: 304 316L 201 202 430 410s 409 409L etc
Description of BA stainless steel coil
BA surface is a special finish, like mirror finish but not bright enough to mirror.
Bright annealing also be called as brilliant annealing, is to anneal the products in a confined space slowly cooling at least 500 degrees, then make the products natural cooling still in the enclosed space, after that to get the brightness and beautiful surface, and without causing decarburization situation.
Purpose and advantage of BA stainless steel coil processing
1, To eliminate work hardening, to obtain the satisfactory metallographic structure. When the use of different performance requirements, the microstructure of the bright annealed after the request is different, bright heat treatment process is also different.
2, Access to non-oxide bright, good corrosion resistance of the surface. Since bright annealing heats the product surface under a protective atmosphere of a mixture of hydrogen and nitrogen, a non-oxidized and bright surface is obtained by strictly controlling the atmosphere in the furnace, in particular, purity, residual oxygen and dew point. Compared with the surface obtained by ordinary annealing and pickling, the chromium-depleted surface of the strip is reduced due to the absence of the oxidation process, and the corrosion resistance is better than that of the 2B plate after polishing.
3, The bright processing Maintain the finish of the rolling surface, can no longer be processed to obtain a shiny surface. Due to the bright annealing, the coil or sheet surface retains its original metallic luster and has been obtained with a shiny surface close to the mirror surface, it can to be used directly without another machining, for general requirements.
4, Can make a special rolling pattern surface strip or coil. As the annealing process, there is no change in the surface of steel, the surface can be completely retained the pattern, you can easily design special cold-rolled strip or coil.
5, there is no pollution caused by ordinary pickling method. After annealing the strip does not require pickling or similar treatment, do not use a variety of chemical substances such as acids, there are no pollution problems caused by pickling.
6, To achieve the control of the stainless steel coil straightness. Because the design of the bright annealing furnace allows sub-section adjustment along the width of the strip or coil, the on-line control of the sheet can be realized by adjusting the cooling rate in the width direction of the strip by the air flow diversion.
Send product request
Other supplier products
BA Stainless Steel Coil | Huaxiao Capacity about BA stainless steel coil, Bright Annealing stainless steel coil Finish: BA, Bright Annealing Film: PVC,PE, PI, Laser PVC, 2... | |
304 304L Cold Rolled Stainless Steel Coils(0.2mm - 8mm) | Huaxiao Capacity about 304/304L cold rolled stainless steel coil, 304/340L CRC Thickness: 0.2mm - 8.0mm Width: 600mm - 2000mm, the narrowed produ... | |
430 Cold Rolled Stainless Steel Coils(0.2mm-8mm) | Huaxiao Capacity about 430 cold rolled stainless steel coil, 430 CRC Thickness: 0.2mm - 8.0mm Width: 600mm - 2000mm, the narrowed products pls c... | |
2205 Hot Duplex Stainless Steel Plate | Huaxiao Capacity about2205 hot rolled stainless steel plate- duplex stainless steel plate, 2205 PMPThickness: 1.2mm - 200mmWidth: 600mm - 3200mm, t... | |
409 409L Hot Rolled Stainless Steel Coils | Huaxiao Capacity about409 409LHot rolled stainless steel coil, 409 409L HRC Thickness: 1.2mm - 16mm Width: 600mm - 2000mm, the narrowed products ... |
Same products
Customized 6082-T6 extruded aluminum profiles for ships/cars | Seller: Henan Hongchang Aluminum Co., Ltd. | Hongchang Aluminum has a stock of marine aluminum plates and various aluminum plates, aluminum co... | |
U71MN QU70 Crane Rail | Seller: Hebei Yongyang Special Steel Group Co., Ltd | YONGYANG Railcan supply all kinds of steel rails, including light rail, heavy rail, crane rail, l... | |
P43 Steel Rail Supplier China | Seller: Hebei Yongyang Special Steel Group Co., Ltd | P43 railis also called 43kg rail, which is the same as GOST R43 rail. P43 steel railis a Chinese ... | |
Chinese Standard Light Steel Rail Gb 8kg Steel Rail | Seller: Hebei Yongyang Special Steel Group Co., Ltd | YONGYANG Rail is an 8kg steel rail supplier from China, It can supply all kinds of steel railsand... | |
136 RE (TR68) Railway Rail | Seller: Hebei Yongyang Special Steel Group Co., Ltd | 136RE railis a type of steel rail used in railway tracks, primarily in America. The “136RE&... |