Nickel wire mesh

• 

Nickel
Nickel Grade Nickel 200 Nickel 201 Nickel 205 Nickel 233

Physical and Mechanical Properties
Tensile Strength ksi 65
MPa 449
Yield Strength ksi 20
MPa 138
Melting point 1728K/2651ºF/1455 ºC
Hardness HB 335(25℃)

Characteristics：
1. Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions.
2. Outstanding resistance to caustic alkalis up to and including the molten state.
3. Virtually immune to inter granular attack above 315℃, chlorates must be kept to a minimum.
4. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidising salt solutions severe attack will occur.
5. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550℃.
6. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.

Applications:
1. Fittings, fasteners exposed to high temperatures in steel mills and power plants.
2. Stainless steel pipe fittings, flanges, pump fittings.
3. Fasteners in exhaust manifolds and boilers.
4. Steam generators.
5. Assembly of dissimilar metals.

Specification
Wire ASTM B160 Diameter:0.05mm-10.0mm,
0.002 Inch to 0.3937 Inch
Wire Mesh GB/T 5330.1
GB/T 17492
JB/T 9155 0.5-250 mesh/Inch
Thickness: Min0.05mm
Sheet SJ 20151-1992 Thickness: 0.05mm and above

Other supplier products

	Cr15Ni60 wire mesh	Cr15Ni60 Chemical Composition: Nickel% Chromium% Iron% Carbon Manganese 60 15 Balance 0.08 max 1 max Physical and Mechanical Properties: Melti...
	Nickel wire mesh	Nickel Nickel Grade Nickel 200 Nickel 201 Nickel 205 Nickel 233 Physical and Mechanical Properties Tensile Strength ksi 65 MPa 449 Yield Stre...
	Zirconium wire mesh	Zirconium Grade Zircaloy Grades Grades 702C Grades 705C Physical and Mechanical Properties 702C 705C Tensile Strength ksi 40,000 50,000 MPa 27...
	Titanium wire mesh	Titanium Titanium Grade (Commonly used) Titanium Grade GR1 GR2 GR3 GR4 Physical and Mechanical Properties Melting point ºC 1660 Yield St...
	Molybdenum wire mesh	Molybdenum Molybdenum Grade 360 361 365 Physical and Mechanical Properties Tensile Strength Ksi(RT) 150 MPa(RT) 1035 Hardness DPH 230 Melting...

Same products

	Cleaning Agent	Seller: Foshan Jiwei New Material Co.,Ltd	Cleaning Agent PUR cleaning agentis a specialized solution designed for effectively removing pol...
	3D Laminating Water-Based Polyurethane Adhesive	Seller: Foshan Jiwei New Material Co.,Ltd	3D Laminating Water-Based Polyurethane Adhesive 3D laminating water-based polyurethane adhesivei...
	Liquild PUR Adhesive	Seller: Foshan Jiwei New Material Co.,Ltd	Liquild PUR Adhesive PUR adhesive, also known as polyurethane reactive adhesive or polyurethane ...
	PUR for Edge Banding	Seller: Foshan Jiwei New Material Co.,Ltd	PUR for Edge Banding Edge banding adhesiveis a type of glue used in furniture manufacturing and ...
	PUR for Flat Lamination	Seller: Foshan Jiwei New Material Co.,Ltd	PUR for Flat Lamination Our PUR (Polyurethane Reactive) adhesive is specially formulated for fla...