Aluminum-beryllium master alloy AlBe5, AlBe3
I. Function
This aluminum-beryllium master alloy containing 2.0%-4.0% beryllium (YS/T 282) is used to add beryllium in aluminum alloy melting under low temperature, with little loss of beryllium.
II. Usage
1. Dry it by baking before use;
2. Adding temperature: Over 700℃
3. Dosage: To be determined by testing.
4. Adding method: Flick off scum, add it into molten aluminum carefully, stir evenly after melting, and keep it still for 5-10min.
III. Packing and storage
This product of Ingot shape presents metallic luster. It is packed in carton by 25±0.25kg/case, and should be stored in a well-ventilated place and protected against moisture.
Send product request
Other supplier products
 |
"Refining, Modifying and Drossing Flux; Sodium Salt Modifying Flux AJB1;ZS-AB1" | This product is used for modifying aluminum-silicon alloy with Si≤2% and short pouring time. AJB1, with available time 40-60min, is Ingot shaped... |
 |
Aluminum Drossing Flux ZS-AZ | Known as fluxing medium, slag-cleaning agent, slag-aluminum separating agent, this drossing/deslagging flux can increase slag temperature, efficien... |
 |
aluminium strontium master alloy AlSr10 stick rod | aluminium strontium master alloy modifier AlSr10 applied to sand casting, die casting, alloy wheels production |
 |
Titanium Boron Grain Refining Flux ZS-AX | Refining flux ZS-CJO (Tablet), refining and drossing flux ZS-CJI, covering flux ZS-CFI. |
 |
Aluminum-Manganese Master Alloy AlMn10 | I. Function`Add manganese element in aluminum alloy melting.`II. Quality and performance characteristics`Stable content and uniform composition`III... |
