Aluminum-beryllium master alloy AlBe5, AlBe3
I. Function
This aluminum-beryllium master alloy containing 2.0%-4.0% beryllium (YS/T 282) is used to add beryllium in aluminum alloy melting under low temperature, with little loss of beryllium.
II. Usage
1. Dry it by baking before use;
2. Adding temperature: Over 700℃
3. Dosage: To be determined by testing.
4. Adding method: Flick off scum, add it into molten aluminum carefully, stir evenly after melting, and keep it still for 5-10min.
III. Packing and storage
This product of Ingot shape presents metallic luster. It is packed in carton by 25±0.25kg/case, and should be stored in a well-ventilated place and protected against moisture.
在线联系供应商
Other supplier products
 |
"Refining, Modifying and Drossing Flux; Sodium Salt Modifying Flux AJB1;ZS-AB1" | This product is used for modifying aluminum-silicon alloy with Si≤2% and short pouring time. AJB1, with available time 40-60min, is Ingot shaped... |
 |
Aluminum Refining Flux (Tablet) ZS-AJ | Refining and purification: This product is used by the penetration method, accompanied with rolling molten aluminum. It can be easily used in cruci... |
 |
Manganese Tablet ZS-Mn75 ZS-Mn80 | I. Function Add manganese element in aluminum and other alloys Substitute manganese-bearing master alloy Applicable to nonferrous metal plate, stri... |
 |
Calcium Removal ZS-ACC | Reference calcium removing capability: This product can remove calcium in a mass ratio of 15-50kg to 1kg. Meanwhile, it is effective in refining an... |
 |
Aluminum Drossing Flux ZS-AZ | Known as fluxing medium, slag-cleaning agent, slag-aluminum separating agent, this drossing/deslagging flux can increase slag temperature, efficien... |
