Chromium carbide powder that extends the service life of mechanical parts by more than 50%
The main methods for preparing this powder include the electric arc furnace method and the carbothermal reduction method. Among them, the powder produced by the carbothermal reduction method has a finer particle size and a lower cost, making it suitable for large-scale application. When the oxygen content of the powder is less than 0.2%, it can reduce the pores and inclusions in the coating and improve the density of the coating. After spraying chromium carbide powder on the surface of the valve tappets of a car engine, the wear of the tappets can be reduced by 80%, and the major overhaul cycle of the engine can be prolonged. Chromium carbide powder is a grayish-black powder with a melting point of approximately 1890℃ and a Mohs hardness of 8.5. It features excellent wear resistance and oxidation resistance, and is an important raw material for preparing wear-resistant coatings and hard alloys. The powder purity can reach over 99%, with a chromium content of ≥75% and a carbon content of 10-15%. The particle size can be controlled within 1-10μm, making it suitable for various sintering and spraying processes. In the steel industry, applying it to the surface of rolls through plasma spraying technology can extend the service life of the rolls by 3 to 5 times and reduce the rolling cost.
Send product request
Other supplier products
 |
Wear-resistant titanium carbide rods - specifications can be determined | Hard alloy titanium carbide round rods can be customized into products with different properties by adjusting the titanium carbide content (usually... |
 |
Industrial-grade titanium carbide rods - excellent fatigue resistance | As a key material in the high-end manufacturing field, hard alloy titanium carbide round rods have excellent corrosion resistance and are not prone... |
 |
Carbide round rods for precision instruments | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。... |
 |
Highly reactive titanium carbide powder | Titanium carbide TiC powder are mainly used in the steel-bonded cemented carbide, cermet components, tungsten-cobalt-titanium cemented carbide and ... |
 |
Wear-resistant titanium carbide rod bearing parts are applicable | Titanium carbide round rods made of hard alloy have excellent electrical conductivity and can be used to make electrodes for electrical discharge m... |
Same products
 |
3D printing spherical titanium carbide powder | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
