Military-grade titanium carbide hard alloy round bar
titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content and binder ratio. When the titanium carbide content is higher, it is more wear-resistant and suitable for roughing scenarios; an increase in the binder ratio improves toughness and makes it more suitable for finishing. Its density is only 6.5g/cm³, 20% lighter than tungsten carbide rods of the same size, making it suitable for making lightweight tools. In the 3C electronics industry, it is often used to process mobile frames, laptop shells and other precision parts, which can ensure that the surface of the product is free of scratches and small dimensional errors. The production process of this round bar is extremely strict, from the control of the purity of titanium carbide powder (purity ≥ 99.5%) to the precise regulation of the sintering temperature (about 1500 ℃), each step affects the final performance. The finished product has excellent dimensional stability, with a coefficient of thermal expansion of only 6×10-⁶/°C under temperature variations from -50°C to 300°C, which is much lower than that of metal materials, ensuring the accuracy of precision tools in different environments. It is widely used in wear-resistant inserts for automotive moulds, which can withstand long-term high-pressure friction without easy wear and prolong the service life of moulds.
Send product request
Other supplier products
 |
Compressive strength over 3000MPa titanium carbide rods | titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content (usually 70-90%) and binder ratio... |
 |
Titanium carbide hard alloy rods - Strong load-bearing capacity | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is amenable to secondary proc... |
 |
Chromium carbide powder improves impact toughness by 30% | Chromium carbide powder has outstanding high-temperature oxidation resistance. Its oxidation rate is low below 900℃ in the air, and the formed oxid... |
 |
Extend the replacement cycle of titanium carbide hard alloy guide wheels | The surface of the guide wheel can be specially treated according to specific requirements. For example, after being coated with a diamond-based ma... |
 |
Titanium carbide rods are available for small-batch purchase | Titanium carbide round rods made of cemented carbide exhibit excellent electrical conductivity, making them suitable for use as electrodes in elect... |
Same products
 |
Anti-vibration wear titanium carbide hard alloy round bars | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The production process of this round bar is highly stringent, encompassing every stage from the c... |
 |
Stable and reliable titanium carbide hard alloy round bars | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The production process of this round bar is extremely strict, from the purity control of titanium... |
 |
Low-temperature resistant titanium carbide round bars | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The anti-adhesion performance of tungsten carbide round rods made from hard alloy is highly effec... |
 |
Scratch-free titanium carbide round rods | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. W... |
 |
High-gloss titanium carbide hard alloy round bars | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | As a key material in the high-end manufacturing field, hard alloy titanium carbide round rods hav... |
